JVC VN-C625U User Manual page 23

Camera Clamping Bracket
Fasten the locking screw
4.
Turn the camera
Make sure that the camera is horizontal,
followed by fitting the camera to the ceiling
mount and turning it in the clockwise direction
until it stops. Upon doing so, check that the
the camera clamping bracket is aligned with
the position of the locking screw of the ceiling
mount.
Turn camera in
clockwise
direction
5.
Fasten the locking screw
Fasten the locking screw using a flathead
screwdriver.
Locking
Screw
If the locking screw is not securely fastened,
the camera may vibrate or fall down.
Be sure to fasten the locking screw firmly.
* To dismantle the camera, perform procedure
from steps
Cautions
1 5
to in the reverse order.
E-23