JVC KD-DV4200J Instructions Manual page 286

ENGLISH
ELECTRICAL CONNECTIONS
A
Typical connections /
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious
damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.
1
Connect the colored leads of the power cord in the order specified in the illustration below.
2
Connect the antenna cord.
3
Finally connect the wiring harness to the unit.
VIDEO OUT
(see diagram / )
Antenna connector
DIGITAL OUT
(see diagram
Line out (see diagram
* 2
Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
* 2
White with black stripe White
Left speaker (front)
Rear ground terminal
To external components (see diagram
15 A fuse
15 A
/
)
)
Black
*
Yellow 2
* 2
Red
Blue
Blue with white stripe
Light green
Gray with black stripe
Right speaker (front)
1
2
3
)
)
To metallic body or chassis of the car
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch) (constant 12 V)
12 V
To an accessory terminal in the fuse block
To the automatic antenna if any (250 mA max.)
To the remote lead of other equipment (200 mA max.)
Gray Green with black stripe
4
* 1
Not supplied for this unit.
* 1
250 mA
200 mA
To parking brake, metallic body or chassis of the car
Green Purple with black stripe
Left speaker (rear)
Ignition switch
Fuse block
Purple
Right speaker (rear)