Still Image Recording - JVC GZ-MG150 Instructions Manual

Still Image Recording

Preparation: Set the power/mode switch to ON.
Slide the power/mode switch to
MODE to select
mode.
MODE
The lamp on the camera lights up.
8 To change the picture quality
Change the settings in [QUALITY].
( pg. 47)
8 To record still images continuously
Set [CONTINUOUS SHOOTING] to
[ON]. ( pg. 48)
8 To change the image size
Change the settings in [IMAGE SIZE].
( pg. 47)
NOTE
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically to
conserve power. To turn the camera on again when using the battery pack, set the power/mode switch
to OFF, then to ON. When using the AC adapter, perform any operation such as zooming.
(still image)
The switch returns
to the original
ON position when it is
OFF
released.
Press the PLAY/REC button to
select recording mode.
SELECT
PLAY/REC
Press and hold the SNAPSHOT
button halfway.
The indicator becomes green when
the captured image is focused.
Press the SNAPSHOT button to
start recording.
40
640 [ 9 9 9 9 ]
FINE
640 [
FINE
[ 9 9 9 9 ]
FINE
17