Using The Camera To Dub Files From A Vcr/ Dvd Player - JVC Everio GZ-MG465 Manual Book

Using the Camera to Dub Files from
a VCR/ DVD Player
Preparation:
•
Set [SWITCH TO ANALOG I/O] to [I/O].
( pg. 63)
•
Turn off all units.
AV Jack
DC Jack
To AC
Outlet
VCR/DVD Player
AV Output Jack
You can also connect the cables using the
jacks on the Everio dock connectors. The
S-Video cable (optional) enables even higher
quality dubbing. ( pg. 10) When other
devices such as a DVD burner are connected
to the Everio dock, turn the power of these
devices off.
AC Adapter
AV Cable
1
Start playback on the VCR/DVD
player.
2
Press the START/STOP button on the
camera at the scene where you want
to start recording.
To stop recording
Press the START/STOP button again.
NOTES
•
If "COPY PROTECTED CONTENT"
appears, the fi le is protected and cannot be
recorded.
•
If the videos you want to record contain both
16:9 and 4:3 screen size, recording stops
where the aspect ratio switches. To record
such videos, you need to perform recording
operation at every switching point.
47