Direct Printing With Pictbridge Printer - JVC Everio GZ-MG465 Manual Book

Print Setting
Direct Printing with PictBridge
Printer
If your printer is compatible with PictBridge,
still images can be printed easily by
connecting the camera directly to the printer
with the USB cable. DPOF setting can also be
used. ( pg. 39)
Preparation:
Close the LCD monitor to turn off the camera.
DC Jack
AC Adapter
PictBridge
Printer
You can also connect the cables using the
jacks on the Everio dock. (
1
Open the LCD monitor to turn on the
camera.
2
Select [DIRECT PRINT].
40
(Continued)
USB Jack
To AC Outlet
USB Cable
USB Jack
pg. 10)
To Print by Selecting a Still Image
After performing steps 1-2 (
3
Select [SELECTED PRINT].
4
Select the desired image.
5
Select the desired setting.
•
[NUMBER OF PRINTS]:
The number of prints can be set from 1
to 99.
•
[DATE]:
Set whether to print the date and time.
6
Select [PRINT].
To stop printing after printing starts
1) Select [STOP].
2) When [QUIT PRINTING?] appears,
select [YES].
left column)