InFocus IN2112 Quick Start Manual

Regulatory model V2000 and M2100
Please read the safety instructions booklet
!
before setting up the projector.
Unpack the box
1
Here's what's included:
Projector
USB Cable Computer Cable
Save the box and packing materials.
Put batteries in the remote
2
The remote uses 2 AA batteries.
1 2
Please dispose of batteries in an environmentally proper manner.
Buy a Full-Featured Remote and Other Custom Accessories
www.infocus.com/store
Status Indicator Panel
The top of your projector includes
a convenient indicator panel with
symbols that light up to show
important status.
For details, see Troubleshooting.
Quick Start Guide English
For other languages, see booklet
Français – voir la brochure
Deutsch – siehe Broschüre
Español – ver folleto
Italiano – vedi opuscolo
Nederlands – zie boekje
Português – consulte livreto
Svenska – se häftet
Русский – см. буклет
한국어 – 소책자 참조
–
*010-0733-00*
Remote Carry Case
Power Cable
3
Power/Standby Service Required
High Temperature Replace Lamp
Connect source
3
Color-coded connections make it easy.
You can connect more than one source if needed.
Connect to: Computer
Computer
Connect to:
1
Connect video using a
www.infocus.com/store part no. SP-CPSTVID-5M or SP-SVIDEO-10M
2
Connect audio using a
Available from A/V dealer or retailer
Connect to:
010-0733-00
How-To Guides are available at www.infocus.com/support/howto
Turn on projector and source
4
5-10 sec.
source
Got an Apple computer?
Computer Cable (included)
You may need an adapter. For more
information, see How-To Guides at
www.infocus.com/support/howto
OR
DVD, VCR
Composite Video cable
Mini Plug Audio Y-Cable
Composite Video Cable
OR
S-Video Cable
Mini Plug Audio Y-Cable
OR
Other kinds of sources
1
Connect the power cord to the projector
and to an electrical outlet
The power light on the projector will light amber.
2
Slide open the lens cover
3

Turn on the projector

Touch the power light (or press power on the remote).
The power light will start blinking green.
4
Wait for the lamp to warm up
After a few seconds, the power light will stop blinking and
turn green. It can take a minute for the lamp to reach
full brightness.
Warning: Do not look directly into the lens
while the projector is being used.
5
Turn on computer or other source
You may need to press a specific key combination to activate
your laptop's external video port. On most laptops, hold down
the FN key while pressing a key labeled CRT/LCD, LCD/VGA,
a monitor icon , or similar. Key combos for popular models:
Apple F7 HP/Compaq Fn+F4 or Fn+F6
Dell Fn+F8 IBM ThinkPad Fn+F7
Fujitsu Fn+F10
Complete laptop activation chart at www.infocus.com/support
Important: If there is still no video, restart your
i
computer (first make sure it's connected to the
projector and the projector is turned on).
6
Change source if needed
If needed, press source (on the projector or remote) to view
the source. You may have to press it more than once.
or an S-Video cable
Good

Better

L R
Audio Out S-Video Video
Out
Out
DVD or VCR*
*Also for game console or cable
box.
Sony Fn+F7
Toshiba Fn+F5
T U R N O V E R