Advertisement
Depth Lines
(Advanced)
Settings: Off, On; Default = On
Depth Lines
SI Range Lines
(Advanced, Side Imaging® View only)
Settings: On, Off; Default = Off
SI Range Lines
NOTE: The range numbers are estimated and should not be used for measurement.
NOTE: If both SI Range Lines and Contour Mode are turned on, the SI Range
Lines will remain on the display, but the individual range numbers are not
available (see Side Imaging® X-Press™ Menu: SI Enhance).
SI Range Lines (with Contour Mode Off)
SI Range Lines (with Contour Mode On)
Sonar Menu Tab
Advertisement
