Page 1
Please take a moment to follow the below steps to ensure the correct set-up (or pairing) of your remote. Step 1: Install batteries in your remote before use. Step 2: Contact our customer service at 1-800-973-8374 or customerservice@reverie.com if you need any additional assistance.
NOT USE OUTDOORS. This product conforms working properly, dropped or damaged, to UL STD 962 or dropped into the water, call Reverie PRODUCT RATINGS customer service. The lift motor in your Power Base is NOT •...
Package contents: support the additional weight of the Remote Control power base. Reverie will not be STEP 7 Mattress Retainer Bar responsible for damage caused to Power Adapter your platform frame.
Remote Pairing Emergency Power Down IF YOU HAVE A WIRELESS IF YOU HAVE A WIRED REMOTE REMOTE Feature If you have a wired remote and want to connect to 2 power bases that will Your remote is already paired Your power base has an emergency move in tandem as a single unit, follow with your power base.
Remote Control Operation Guide HEAD AND FOOT ADJUSTMENTS (A,C) Adjusts the head and foot sections to the desired positions. A. RAISE & LOWER HEAD SECTION FLAT (B) Returns both head and foot to the B. RETURN TO FLAT flat position. C.
Headboard Bracket Assembly PARTS LIST If the distance needs to be adjusted, STEP 2 make an adjustment to the position A. Inner Headboard Brackets (2) of the Inner Headboard Bracket (A). Bolt an Inner Headboard Bracket (A) B. Outer Headboard Brackets (2) Now tighten the bolts from step 2, to the headboard mount tube (located attaching it to the frame.
Troubleshooting In the event the Power Base fails to operate, investigate the symptoms and possible solutions provided in the chart below: SYMPTOM SOLUTION • Make sure your remote is paired or plugged into the bed. • Your electrical circuit breaker may be tripped. •...
Page 8
Please call Customer Service. • Either your phone is connected to the bed via the Reverie Nightstand app or another remote is Remote states other remote connected. connected. Disconnect from bluetooth in the app and make sure the other remote is asleep.
Need help?
Do you have a question about the R310LP and is the answer not in the manual?
Questions and answers