Carter-Hoffmann McDonald’s Pie Merchandiser Model(s) MDPM2 and MDPM4 Service Providers Manual Table of Contents Introduction…………………………2 Safety………………………………..2 Installation…………………………..2 Operation……………………………2 Programming Instructions…………3 Non-Scheduled Maintenance……..4 Parts Identification………………….4 Wiring Diagrams……………………5 Replacement Parts………………...6 Parts Pricing………………………..6 Troubleshooting……………………7 Warranty……………………………7 This information is considered confidential, do not copy or distribute without the consent of Carter-Hoffmann. UL File NSF File Number: 838G...
INTRODUCTION The MDPM Pie Merchandiser is designed to hold pies at serving temperature. The cabinet has a programmable controller with a low temperature alarm. The controller is factory pre-set for a holding temperature of 165°F (74°C) for baked pies or 155°F (69°C) for fried pies, and a low temperature alarm of 140°F (60°C).
PROGRAMMING INSTRUCTIONS The controller has been factory pre-set for a holding temperature of 165˚F (74˚C) for baked pies, 155˚F (69˚C) for fried pies, and a low temperature alarm of 140˚F (60˚C). In most cases, the temperature will not need to be changed.
NON-SCHEDULED MAINTENANCE Changing Illuminated Front Graphic on Door: Tools: Phillips Screwdriver Remove the four screws on the sides of the door and remove the door trim. Slide the POP graphic out. Slide new POP graphic in, making sure to leave white diffuser background panel in place.
MDPM PARTS LIST WITH PRICING (ALL MODELS) CABINET TYPES Part List INT’L U.S. INT’L INT’L INT’L INT’L Part Description Number Price MDPM2 MDPM2 MDPM2 MDPM2 MDPM4 MDPM4 MDPM4 110-120V 110-120V 200-208V 220-240V 110-120V 200-208V 220-240V 18614-0338 $63.00 FAN MOTOR 110-120 volt 18614-0339 $63.00 FAN MOTOR 200-208 volt...
TROUBLESHOOTING MATRIX PROBLEM DISPLAY READS PROBABLE CAUSE CORRECTIVE ACTION Unit unplugged Plug unit into outlet Cabinet hi-limit tripped Reset cabinet hi-limit NO FAN / Blank Facility circuit breaker tripped Reset circuit breaker NO LIGHTS Faulty On/Off switch Replace switch Faulty wiring Follow wiring per diagram Cabinet located too close to heat source Relocate cabinet to another location...
Need help?
Do you have a question about the CARTER-HOFFMANN MDPM2 and is the answer not in the manual?
Questions and answers