Screen Menu - Hitachi CP-X809 User Manual

SCREEN menu

From the SCREEN menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor button
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
Item
LANGUAGE
MENU POSITION
BLANK
(continued on next page)
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
ENGLISH � FRANÇAIS � DEUTSCH � ESPAÑOL � ITALIANO
�
TÜRKÇE
�
POLSKI
�
SUOMI
�
РУССКИЙ � SVENSKA �
Using the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press the MENU button on the remote control
or keep no operation for about 10 seconds.
Using the ▲/▼ buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature
(23). It is displayed by pressing the BLANK button on the remote
control.
MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK
MyScreen
ORIGINAL
BLUE, WHITE,
BLACK
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the plain black screen after several minutes.
Description
� �
Feature
Screen can be registered by the MyScreen item
(41)
.
Screen preset as the standard screen.
Plain screens in each color.
SCREEN menu
�
NORSK
�
NEDERLANDS
�
PORTUGUÊS
�
�
39