Download Print this page

OzSpy DSIMFCAMGPS User Manual

Professional gps tracker detector

Advertisement

Quick Links

Professional GPS Tracker Detector
 Add-on GPS Tracker Magnet Finder
Thank you for purchasing this Hi-tech device.
over this manual for proper use, save this manual
 Expose all 2G / 3G / 4G GPS tracker
This device is special made of detecting GPS
what kind of transmission technologies: SM (Short
GPRS (mobile data transmission), through
networks (mobile phone system) of 2G / 3G / 4G
surely identify the signal of GPS tracker and
privacy.
 INSTALL BATTERY
Battery compartment is located in the rear side. Remove the battery cover, install AAA / UM-4
battery x 4 according to the + – indication, then put on the battery cover. This device is
available both dry battery and rechargeable
Note: Never connect the battery charger or external power bank when to use dry battery
inside.
The power switch is located in the center of right side with 1 0
the antenna before use.
 POWER-ON SELF-TEST
Every time this device is switched on, this device will do power-on self-test, the LEDs will be
lit up. Then the 8
signal strength indication LEDs
to 0. The 7-segement LED also shows 8 7 6 ... to 0 synchronously.
AUTO ENVIRONMENT CHECK
After power-on self-test, this device will run auto environment check. This device will beep 5
times to notify the user if switch on this device in the place with strong noise, so as base
station, TV station, construction machine or welding processing where emit or occur high
electric waves.
This device will be interfered with those noises and could not be able to do detection of GPS
tracker in such place, please change to another quiet place.
▲ NOTICE TO EFFECTIVELY DETECT GPS TRACKER ▲
1. GPS Tracker can be set to send location data from 15
minutes or more. First you must power off your smart
airplane mode or switch off the function phone, to
caused by stand-by signal or dial-in phone call.
2. It is important to find a quiet place WITHOUT interfering with base station or others using
mobile phone, and to get accurate detection.
DSIMFCAMGPS
User's Manual
battery.
will be put out one-by-one, from 8 7 6 ...
Please first read
and keep it handy.
tracker, no matter
message)
or
various
cell
/ CDMA, it can
protect
your
marking. Pull out
seconds to 30
phone
at
avoid false alarm

Advertisement

loading
Need help?

Need help?

Do you have a question about the DSIMFCAMGPS and is the answer not in the manual?

Questions and answers

Summary of Contents for OzSpy DSIMFCAMGPS

  • Page 1 DSIMFCAMGPS Professional GPS Tracker Detector  Add-on GPS Tracker Magnet Finder User's Manual Thank you for purchasing this Hi-tech device. Please first read over this manual for proper use, save this manual and keep it handy.  Expose all 2G / 3G / 4G GPS tracker...
  • Page 2: Package Contents

    3. Do not try to find a GPS tracker inside the building, underground parking lot or under metal shade shelter. Because GPS tracker will not be activated without GPS signal. 4. This device has two detection modes: 3G(2100MHz), 2G/4G (5G: 3300~3700MHz) switchable.
  • Page 3  AUTO INDICATION OF DETECTING STATUS Detecting: Yellow LED blinking GPS Tracker: When to detected radio wave from GPS tracker, the blue LED will light up. The 8-LED of signal strength indicator will also light up and the buzzer goes off at the same time. ...
  • Page 4  ADDITIONAL BONUS FEATURE: DISCOVER 3G / 4G BUG & TRANSMITTING CAMERA 1. This device has additional features of exposing and searching 3G / 4G new bug (transmitting hidden microphone) and transmitting spy camera. 2. To detect 3G / 4G new bug (transmitting hidden microphone) and transmitting spy camera, please set the detection mode at 3G, most of those new bug and spy camera are applied with 3G 2100 technology.
  • Page 5  TWO KINDS OF WARNING Press and hold the minus (-) button in the left side for 3 seconds, this device will be shift the warning mode between beep and vibration. The default warning is Beep. Beep: Audible alarm (default) Vibra: Vibration ▲...
  • Page 6  MAGNET FINDER 1. The front of the Magnet finder and the front of this device are in the same direction, insert Magnet finder into the jacks bottom side. Note: The Magnet finder will not work if insertion with wrong side. 2.