13. TECHNICAL INFORMATION..................20 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not keep the appliance door open without • supervision to prevent to fall on it. Before maintenance, deactivate the appliance and •...
Page 5
ENGLISH • The appliance can release hot steam if you open the door while a programme operates. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. 2.5 Service • Contact the Authorised Service Centre to repair the appliance.
ENGLISH 4.1 Indicators Indicator Description Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. 5. PROGRAMMES Programme Degree of soil Programme phases Options Type of load • Normal soil •...
5.1 Consumption values Water Energy Duration Programme (kWh) (min) 0.932 7 - 12 0.6 - 1.4 40 - 150 13 - 15 1.3 - 1.5 140 - 160 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
ENGLISH The higher the content of these minerals, your area. Your local water authority can the harder your water is. Water hardness advise you on the hardness of the water is measured in equivalent scales. in your area. It is important to set the right level of the water softener to assure The water softener should be adjusted good washing results.
If you use standard detergent or multi- not possible to deactivate these acoustic tablets without rinse aid, activate the signals. notification to keep the rinse aid refill There is also an acoustic signal that indicator active. sounds when the programme is completed.
ENGLISH If the option is not applicable to the The total programme duration decreases program, the related indicator does not by approximately 50%. come on or it flashes quickly for a few The washing results are the same as with seconds and then goes off.
8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
ENGLISH Starting a programme with delay start 1. Set a programme. 2. Press again and again until the display shows the delay time you want to set (from 1 to 24 hours). The delay indicator comes on. 3. Close the appliance door to start the countdown.
End of the programme automatically deactivate the appliance. When the programme is completed the 2. Close the water tap. display shows 0:00 . 1. Press the on/off button or wait for the AUTO OFF function to 10. HINTS AND TIPS 10.1 General...
ENGLISH • Make soft the remaining burned food • The cap of the salt container is tight. on the items. • The spray arms are not clogged. • Put hollow items (cups, glasses and • There is dishwasher salt and rinse aid pans) with the opening down.
8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). CAUTION! An incorrect position of the filters can cause bad washing results and damage 4.
ENGLISH 12. TROUBLESHOOTING If the appliance does not start or it stops With some problems, the display during operation. Before you contact an shows an alarm code. Authorised Service Centre, check if you The majority of problems that can can solve the problem by yourself with occur can be solved without the need the help of the information in the table.
Problem and alarm code Possible cause and solution The program lasts too long. • Select the TimeSaver option to shorten the program time. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown.
Page 19
ENGLISH Problem Possible cause and solution Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level. •...
Problem Possible cause and solution • Refer to "The water softener". Limescale deposits on the ta- bleware, on the tub and on the inside of the door. Dull, discoloured or chipped • Make sure that only dishwasher-safe items are washed tableware.
Need help?
Do you have a question about the FAVORIT55322VI0 and is the answer not in the manual?
Questions and answers