How Do I Send And Receive Text Messages - HP iPAQ h6310 Manual

360338-xx1 Onyx How Do I.book Page 56 Wednesday, June 23, 2004 1:34 PM
receive instructions on how to chat with an online agent, refer to
the question "How Do I Find Information On Topics Not Covered
in This Booklet?" found at the end of this document.
How Do I Send and Receive Text
Messages?
You can send and receive SMS text messages on your iPAQ
Pocket PC by using the phone option. These text messages are
sent and received through your wireless phone service provider
by using a phone number as the message address.
Note:
You must have a Subscriber Identity Module (SIM) card
installed in your Pocket PC to send and receive text messages. A
SIM card either came with your unit or must be purchased from a
mobile phone service provider or electronics store.
To compose and send a message:
1. In the message list, tap New.
2. To select an account, tap the From list and select SMS.
3. Enter the SMS address of one or more recipients, separating
them with a semicolon. To access addresses and phone
numbers from Contacts, tap To.
4. Enter your message. To quickly add a canned message, tap
My Text and tap a desired message.
5. To check spelling, tap Edit > Spell Check.
6. Tap Send. If you are working offline, the message is moved
to the Outbox folder and will be sent the next time you
connect.
Note:
If you are sending a text message and want to know if it
was received, before sending the message, tap Edit > Options,
and select Request SMS text message delivery notification.
56