Setting Aeb; Setting Af Area; Setting Af Lamp - HP CW450t User Manual

Setting AEB

AEB stands for Automatic Exposure Bracketing. It takes 3 consecutive photos in the order of standard exposure,
under exposure and overexposure compensation.
To set AEB
1. From the Record menu, tap AEB button.
2. Tap On/Off to enable/disable AEB.

Setting AF area

AF stands for Automatic Focus. This feature determines the area on which the camera focuses.
To set AF Area:
1. From the Record menu, tap
2. Tap the desired option button to apply.
For more information, please refer to "Setting the AF Area/Face tracking/Touch Shot" on page 25.

Setting AF Lamp

The AF Lamp function allows you to record images even low light
conditions.
If AF Lamp is set to Auto, the AF lamp located in the front of the
camera, see "Front View" on page 6, emits an red light by half
pressing the Shutter button
focus easily.
To set AF Lamp:
1. From the Record menu, tap
2. Tap On/Off to enable/disable AF lamp.
AF Area.
allowing the camera to
AF Lamp.
40