HP DF710C2 User Manual page 16

Copying pictures onto frame internal memory
From a PC/laptop: For the first connection, it is recommended to
remove all external memory sources. Power on the HP Digital
Picture Frame and connect the HP Digital Picture Frame to your
Windows™ 2000 (with service pack 4 or greater), Windows™
XP (with Service Pack 2 or greater), or Windows™ Vista PC/
notebook by using the USB cable provided with the product. 3
new drive letters should appear in Windows Explorer. These new
drive letters represent the Digital Picture Frame's internal memory,
memory card slot 1, and memory card slot 2. (see illustration
below):
The digital picture frame will display the graphic below:
1 of the 3 new drive letters is the HP Digital Picture Frame's
internal memory and labeled HP df710 , df760, or df810
(depending on your photo frame model). Drive letter assignment
MAY vary from PC to PC.
15