HP P6230F - Pavilion - Desktop PC Supplementary Manual page 44

Removing and Replacing Memory
15–25 minutes
Before You Begin
Use the product specification for your model to find the
correct type of DIMM (dual in-line memory module) for
your computer and the maximum memory amount.
Memory upgrades may not be needed. Many computers
already have the maximum amount of memory installed.
Observe the following requirements before removing and
replacing memory.
Tools Needed
Flathead screwdriver
You can use a flathead screwdriver with the
following screw (torque screw).
CAUTION: Static electricity can damage
the electronic components inside the
computer. Discharge static electricity by
touching the metal cage of the computer
before touching any internal parts or
electronic components.
2
WARNING:
Never open the cover with the
power cord attached or power
applied. You may damage your
computer or be injured from the
spinning fan blades.
Avoid touching sharp edges
inside the computer.
NOTE: Computer features may vary by model.
Removing Memory
1 Before you begin servicing the computer, remove the
Pocket Media Drive, if it is present.
2 Turn off the computer.
— Removing and Replacing Memory
537486-001