Removing An Add-In Card - HP P6230F - Pavilion - Desktop PC Supplementary Manual

Removing and Replacing an Add-In Card
15–25 minutes
Before You Begin
Observe the following requirements before removing and
replacing an add-in card.
Tools Needed
Flathead screwdriver
You can use a flathead screwdriver with the
following screw (torque screw).
CAUTION: Static electricity can damage
the electronic components inside the
computer. Discharge static electricity by
touching the metal cage of the computer
before touching any internal parts or
electronic components.
WARNING:
Never open the cover with the
power cord attached or power
applied. You may damage your
computer or be injured from the
spinning fan blades.
Avoid touching sharp edges
inside the computer.
NOTE: Computer features may vary by model.
2

Removing an Add-In Card

1 Before you begin servicing the computer, remove the
Pocket Media Drive, if it is present.
2 Turn off the computer.
3 Disconnect all peripherals and cables from the front
and the back of the computer. Disconnect the power
cord last.
— Removing and Replacing an Add-In Card
537489-001