1. Manuals
  2. Brands
  3. Puregas Manuals
  4. Dehumidifier
  5. P210WLP Series
  6. User manual

Puregas P210WLP Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P210WLP Series Air Dryer
User's Guide
Models covered:
P210WLP
P210WLP-V
P212WLP
P212WLV-V
100513941 – Rev. W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P210WLP Series and is the answer not in the manual?

Questions and answers

Related Manuals for Puregas P210WLP Series

Summary of Contents for Puregas P210WLP Series

  • Page 1 P210WLP Series Air Dryer User’s Guide Models covered: P210WLP P210WLP-V P212WLP P212WLV-V 100513941 – Rev. W...

  • Page 3: Welcome & Congratulations

    P210WLP Series Air Dryer User’s Guide 1. Welcome & Congratulations Congratulations on your purchase of a new PUREGAS P210WLP Series Air Dryer! We here at Altec AIR are very proud of our products, and we are committed to providing you with the best value and service possible.

  • Page 4: Table Of Contents

    9.2 Measuring Compressor Amp Draw ..40 5.2 Key Features ..........8 9.3 Measuring Compressor Voltage .... 41 5.3 P210WLP Series Air Dryer Models ..8 9.4 Measuring Incoming Voltage ....42 5.4 Technical Specifications ......9 9.5 Testing Consistent Heatless Dryer 5.5 Dryer Function Overview ......
  • Page 5 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 12. Service & Repair........60 13.17 High Compressor Last Run Time 12.1 Services Offered ........60 Alarm ............68 12.2 Initiating a Service Transaction ... 60 13.18 Can’t Create a High Compressor Last Run Time Alarm ..........

  • Page 6: Safety & Warning Information

    WARNING! High Noise. PUREGAS air-dryers are meant to be installed in an unattended area. CAUTION! Proper installation & maintenance as outlined in this User’s Guide is extremely important to ensure the reliability and longevity of the equipment as well as prevent damage or personal injury.
  • Page 7 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide CAUTION! Depressurizing the Air Dryer may be necessary before performing certain procedures. NEVER remove pressure sensing tubes from the Control Board without depressurizing the Air Dryer first, or damage to the Control Board will occur.

  • Page 8: Overview & Specifications

    5. Overview & Specifications 5.1 Product Description The P210WLP Series Air Dryers from Altec AIR are designed to intake wet ambient air and remove the moisture for delivery to applications requiring a constant, on- demand source of dry, pressurized air. This process is fully automatic and will remain consistent with minimal required periodic maintenance.

  • Page 9: Technical Specifications

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 5.4 Technical Specifications P210WLP-V P210WLP P212WLP P212WLP-V Output Capacity Up to 200 SCFD (5.7 SCMD) @ 100% Duty Cycle 110 – 125 VAC 208 – 253 VAC Power Requirements 60 HZ 50 –...

  • Page 10: Dryer Function Overview

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 5.5 Dryer Function Overview Component Description Inlet Muffler Minimizes compressor intake noise Compressor Compresses air drawn in by the inlet muffler Removes liquid water droplets from the Coalescing Filter airstream prior to the heatless dryer...

  • Page 11: Installing Your Dryer

    Performing procedures not described in this User’s Guide or installing components not supplied by Altec AIR is NOT RECOMMENDED AND MAY VOID THE WARRANTY. IMPORTANT! Installation of PUREGAS air-dryers are intended for network telecommunication facilities (non-customer premises) only. Page 11 of 76 100513941 – Rev. W...

  • Page 12: Before You Begin

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 6.2 Before You Begin 6.2.1 Carefully inspect the unit, including the shipping box as well as the air Dryer, for ANY DAMAGE CAUSED BY SHIPPING. If any shipping damage is detected, it is important to file a claim with the shipping company prior to continuing the installation procedures.

  • Page 13: Required Tools And Materials

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide (4) Connector, Male 1/4 MPT Swivel Elbow (1) Rack Mounting U-shaped Bracket (P210WLP-V Excluded) (2) Rack Mounting Ear Brackets (P210WLP-V Excluded) (1) Drawer Slide Pair (P210WLP-V Excluded) (2) Vertical Wall Mount Bracket (P210WLP-V Only) (1) User’s Guide (not shown)
  • Page 14 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide NOTE: If ANY SHIPPING DAMAGE is detected, file a claim with the shipping company prior to continuing the installation procedures. 6.5.4 Remove the wooden shipping block from the compressor assembly by removing the single #8-32 x ¾”...
  • Page 15 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 6.5.7.1 Extend the drawer slide brackets and separate into two components by pressing down on the black lever and pulling apart. 6.5.7.2 Install the smaller of the two slide components on the...
  • Page 16 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 6.5.7.4 Install one of the “mounting ear” brackets on each side of the U- shaped mounting bracket using two 10-32 x 5/8” screws, two washers, and two 10-32 Nylock nuts. NOTE: The mounting ears are reversible to accommodate both 19” and 23”...
  • Page 17 6.5.8 For HORIZONTAL WALL MOUNT installation (See section 6.5.7 for rack mount installation & section 6.5.9 for vertical wall mount installation) 6.5.8.1 Each P210WLP Series dryer, excluding P210WLP-V dryers, is shipped with a standard rack mount installation kit. Section 10.3 outlines the general installation process for wall mounting a P210WLP Series dryer.
  • Page 18 NOTE: This section is only applicable for P210WLP-V model units. All other P210WLP series dryers MUST be mounted in a horizontal orientation. 6.5.9.1 Each P210WLP-V dryer is shipped with a standard vertical wall mount installation kit. Section 6.5.9 outlines the general installation process for wall mounting a P210WLP-V dryer.
  • Page 19 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 6.5.9.2 Install a wall mount bracket on each side panel of the unit using two 8-32 x 3/8” screws and two washers. Use Loctite to secure the screws. 6.5.9.3 Refer to the following hole pattern to locate fasteners on the wall: 6.5.9.4 Refer to the fastener manufacturer for installation instructions of wall...
  • Page 20 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 6.5.11 Plug AC Power Cord to Dryer. 6.5.12 Wire or plug the power cord into:  110 - 125 VAC power outlet for the P210WLP model  208 - 253 VAC, 1 phase, power outlet for the P212WLP models o Line –...
  • Page 21 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 6.5.15 Let the Dryer run until the Humidity drops below 2%. (may take up to 15 minutes or longer). 6.5.16 NOTE: Press the RESET button if the Dryer goes into SHUTDOWN mode.
  • Page 22 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide adjustment clockwise to lower it. In some instances, it’s possible that there is enough of an external leak outside the dryer where the bleed isn’t needed at all and just needs to be disabled by engaging the “Off” position on the lever.

  • Page 23: Installation Checklist

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide With Compressor NOT running: 6.5.23.1 Listen for any ‘hissing’ sounds which may indicate a fitting or hose air leak. If utilizing the Adjustable Bleed Orifice than leaking from that component is expected and is considered normal.

  • Page 24: Moving Your Dryer

    7. Registering Your Dryer Please take a moment to register your PUREGAS P210WLP Series Air Dryer. Registering is necessary to activate the Limited Warranty on your product. Once you register, you are eligible to receive free technical support, as well as updates concerning your Altec AIR products.

  • Page 25: Operating Your Dryer

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide Company Name: Location Name: Shipping Address: City: State: Zip Code: Contact Name: Phone #: ( ext. Email: 8. Operating Your Dryer 8.1 Safety & Warning Information WARNING! Extreme care should be exercised to avoid contact with live electrical circuits.

  • Page 26: Connecting Air Supply Lines To The Dryer

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 8.2 Connecting Air Supply Lines to the Dryer 8.2.1 Connect a 3/8” air supply line to the Outlet Port. 8.2.2 Power the Dryer ON. CAUTION: Be careful when removing outlet plugs or connected Air Supply Lines.

  • Page 27: Using The Front Panel Display

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 8.5 Using the Front Panel Display CAUTION! The Display Screen is covered by a clear protective layer that guards against Electrostatic Discharge (ESD). DO NOT REMOVE THIS LAYER. Front Panel Menu Item...
  • Page 28 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 8.5.1 The P210 series dryer has 3 main display screens (shown below) that cycle every few seconds. These provide real time data of the operating conditions of the dryer. Any triggered alarms will be displayed to the right of the corresponding status category if present.
  • Page 29 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide Resets all parameters to ↑•↑↑↑• Factory Reset RESET factor defaults ↑•↑↑↑↑• Set Date Sets the system date ↑•↑↑↑↑↑• Set Time Sets the system time Sets the unit of measure for ↑•↓↓↓↓•...
  • Page 30 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide above, an alarm will be triggered Monitors enclosure High Cabinet temperature and will Temperature 120°F (49°C) shutdown dryer if it Alarm gets to hot Tracks compressor run See System Compressor Total...

  • Page 31: Open Panel

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 8.6 Open Panel 8.6.1 Open panel latches and remove the top panel. 8.7 Setting the System Pressure With Compressor running: 8.7.1 Open Panel (see section 8.6 ). 8.7.2 Pull the Capacity Control Valve knob out.

  • Page 32: Connecting Ti Common Alarm Terminals

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 8.8.2 Turn knob until Outlet Pressure (OUTLET) reading is at the desired setting. 8.8.3 Tighten the retaining nut to lock value in place. 8.9 Connecting to Common Alarm Terminals 8.9.1 Wire the Alarm Harness to monitoring device using the table below for...

  • Page 33: Connecting Via Web Browser

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 8.10 Connecting via Web Browser For Remote Air Dryer Monitoring Via An IP Network:  The Air Dryer and Laptop/PC must be configured with a valid IP Address, and share the same Subnet Mask, and Gateway Address for the network.
  • Page 34 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 2. On the left hand side under the Network & Internet section click “Ethernet”, than under Related Settings click “Change Adapter Settings”. 3. Select your ethernet port then right click and select properties.

  • Page 35: Using The Web Interface

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 5. Next check the button labeled “Use the following IP address:”. Then enter the following criteria.  IP Address:192.168.1.100  Subnet Mask: 255.255.255.0  Default Gateway: 192.168.1.1 *Note for dryers with different IP addresses, the entries will need to match the network settings that the dryer is on.
  • Page 36 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide Page 36 of 76 100513941 – Rev. W...
  • Page 37 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide Page 37 of 76 100513941 – Rev. W...
  • Page 38 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide Page 38 of 76 100513941 – Rev. W...

  • Page 39: Updating Firmware

    This software requires a SNMP Definition & Configuration File (MIB file) in order to properly communicate with the Air Dryer. The files for the P210WLP Series Air Dryers can be downloaded from our website www.AltecAIR.com under the Product Support section SNMP Files link. It is necessary to import this file into your SNMP operating software.

  • Page 40: Testing Your Dryer

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 9. Testing Your Dryer 9.1 Safety & Warning Information WARNING! Extreme care should be exercised to avoid contact with live electrical circuits. Many procedures performed during installation, operation, testing, and maintenance of this Air Dryer require the equipment to be running, creating a situation for potential electrical shock.

  • Page 41: Measuring Compressor Voltage

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 9.2.2 Locate wire #19 coming directly from the compressor 9.2.3 Use an Amp Meter to measure the running amps. With the compressor running, the running amps should measure 1.0 amp or below.

  • Page 42: Measuring Incoming Voltage

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide With the Compressor running: 9.3.3 Use a Voltmeter to measure across the board terminals where wires #6 and #7 are connected. The voltage should measure 115 (10%) for P210WLP models 230 VAC (10%) for P212WLP...

  • Page 43: Cycling

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 9.4.3 Use a Voltmeter to measure across the board terminals where wires #4 and #5 are connected. The voltage should measure 110 - 125 VAC for the P210WLP or 208 - 253 VAC for the P212WLP.

  • Page 44: Voltage

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide  Place your hand behind the purge port to feel for purging air. Air should be steadily purging from the port, and a burst of air should be felt every 60 seconds as the dryer cycles between towers.

  • Page 45: Testing Air Dryer Fan

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 9.7 Testing Air Dryer Fan NOTE: To test the fan, the cabinet temperature must be above 90 F (32 C). 9.7.1 Locate the fan exhaust on the rear of the unit.

  • Page 46: Alarm

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide With Compressor running: 9.8.2 Verify the compressor shuts down when the tank pressure (TANK) reaches 50 PSI (344.7 KPA). If the tank pressure (TANK) fails to reach 50 PSI (344.7 KPA), see section 13.15 for troubleshooting information.

  • Page 47: Shutdown

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide NOTE: For this test, allow the Display Screen to cycle through the information screens. 9.9.1 Start timing when the compressor turns on. 9.9.2 Depressurize air Dryer (See sections 11.1 for detail).
  • Page 48 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 9.10.1 Power the air Dryer OFF. 9.10.2 Depressurize air Dryer (see section 8.3.3) 9.10.3 Disconnect the humidity sensor from the control board lead 9.10.4 Unscrew and remove the Humidity Sensor from the Humidity Block.

  • Page 49: Testing High Outlet Pressure Alarm

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 9.10.8 Replace the Humidity Sensor into the Humidity Block. 9.10.9 Press the RESET Button to clear the Humidity alarm. If you are unable to create a Humidity / Shutdown alarm as described, see section 13.10 for troubleshooting information.

  • Page 50: Testing Low Outlet Pressure Alarm

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 9.11.4 Turn Outlet Pressure Regulator knob counter-clockwise until Outlet Pressure (OUTLET) reading lowers to the reading recorded in step 9.11.1 9.11.5 Tighten the retaining nut to lock the setting in place 9.11.6 Press the RESET Button to clear...
  • Page 51 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 9.12.3 Turn knob counter- clockwise until Outlet Pressure (OUTLET) reading drops below the low outlet pressure threshold (0.3 PSI, 2.1 KPA default). After one (1) minute, the Low Pressure Alarm should appear on the display.

  • Page 52: Testing Air Fittings & Hoses For Leaks

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 9.12.6 Press the RESET Button. If you are unable to create a Low Outlet Pressure Alarm as described, see section 13.8 for troubleshooting information. 9.13 Testing Air Fittings & Hoses for Leaks NOTE: This is a general procedure that can be applied to any fitting or hose that has air pressure in it.

  • Page 53: Maintaining Your Dryer

     Replace the fitting / hose / component 10. Maintaining Your Dryer In order to ensure that your P210WLP Series Air Dryer continues to operate efficiently and reliably, Altec AIR recommends performing preventative maintenance procedures at the specified six month and annual intervals.
  • Page 54 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide creating a situation for potential electrical shock. It is highly recommended that you remove all jewelry before performing any procedures. WARNING! Internal surfaces may be hot. Use care when coming into contact with internal components as there is a potential for some of these components to become hot when in operation or standby.

  • Page 55: Six Month Maintenance

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 10.2 Six Month Maintenance MODEL: LOCATION NAME: SERIAL NUMBER: ADDRESS: DATE INSTALLED: Maintenance Interval (Months) Procedure Section Measure & Record Compressor Amp Draw Measure & Record Incoming Voltage (must be 110 - 125 VAC for P210WLP models and must be 208 - 253 VAC for P212WLP models) Test High &...
  • Page 56 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide Note: In the event of a high duty cycle application, it may be necessary to perform preventative maintenance at more frequent intervals, which will be indicated by a compressor total hour alarm. Refer to Compressor Total Hour Alarm (section 8.6.6)

  • Page 57: Replacement Parts & Accessories

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 11. Replacement Parts & Accessories 11.1 Dryer Parts Adjustable Bleed Orifice Description Part Number Quantity Recommend Spare Adjustable Bleed Orifice 100522051 On/Off Valve (Adjustable Bleed 100508601 Orifice)  (1) Heatless Dryer Assembly See section 11.2 for detail...

  • Page 58: Heatless Dryer Assembly Parts

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 11.2 Heatless Dryer Assembly Parts Description Part Number Quantity Heatless Dryer - 115V Units MDH1-ALE-S68 230V Units MDH1-DLE-S68 Desiccant Chamber 51843 Cycle Timer 115V Units 51800 230V Units 50022 Solenoid Valve...

  • Page 59: Accessories For Your Dryer

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 11.3 Accessories for Your Dryer Recommend Description Part Number Spare Annual Maintenance Kit  (1) P017612 Includes replacement filter element and compressor maintenance kit. Horizontal Wall Mounting Kit P017460 Includes mounting brackets and hardware.

  • Page 60: Service & Repair

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 12. Service & Repair Only Altec AIR can offer factory direct rebuilds backed by a 6 month factory warranty.  2 week turnaround time  Estimates available upon request  Minimum service charge fee applies 12.1 Services Offered...

  • Page 61: Troubleshooting Your Dryer

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 13. Troubleshooting Your Dryer 13.1 Before You Call Altec AIR PLEASE READ THIS SECTION FIRST. It is important that you use the following sections in order to diagnose and attempt to fix the problem with your Air Dryer before placing a call to Altec AIR Technical Support.

  • Page 62: Air Dryer Won't Power On

    Do not test the Humidity Sensor with an ohm meter or apply any DC voltage. This will render the Humidity Sensor defective. WARNING! High Noise. Puregas air-dryers are meant to be installed in an unattended area. CAUTION! Observe precautions for handling Electrostatic Sensitive Devices.

  • Page 63: High Outlet Pressure Alarm

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 13.5 High Outlet Pressure Alarm Possible Cause Check Corrective Action Outlet Pressure set too Verify Outlet Pressure Adjust outlet pressure high (OUTPUT) reading regulator (section 8.8 ) (section 0) High Outlet Pressure...

  • Page 64: Can't Create A Low Pressure Alarm

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 13.8 Can’t Create a Low Pressure Alarm Possible Cause Check Corrective Action Defective Outlet Verify that the Outlet Replace Outlet Pressure Pressure Regulator Pressure Regulator can Regulator if unable to be adjusted adjust pressure (section 8.8 )

  • Page 65: Shutdown

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide within acceptable levels. Defective Humidity Perform the Testing Troubleshoot Can’t Sensor Humidity Alarm and Create a High Humidity System Shutdown test Alarm / Shutdown (section 9.10 ) condition (section 13.10 )

  • Page 66: High Cabinet Temperature Alarm

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide Leak in air system Check all hoses and Connect, tighten, or fittings between replace leaking compressor and Air component Tank for air leaks (section 9.13 ) Defective control board Measure voltages at...

  • Page 67: Compressor Doesn't Operate

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 13.14 Compressor Doesn’t Operate Possible Cause Check Corrective Action Defective compressor Measure compressor If voltage is good, voltage replace compressor (section 9.3 ) (section 11.1) or send it in for repair (section 12.

  • Page 68: Compressor Excessive Amp Draw

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 13.16 Compressor Excessive AMP Draw Possible Cause Check Corrective Action Restriction in air line Remove Discharge If measurement is Hose from compressor below the (hose to the heatless recommended amps, Dryer)

  • Page 69: High Compressor Last Run Time

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 13.18 Can’t Create a High Compressor Last Run Time Alarm Possible Cause Check Corrective Action High Compressor Last Verify High Allow the compressor Run Time Alarm set Compressor Last Run to run longer than the...
  • Page 70 Altec AIR, LLC P210WLP Series Air Dryer User’s Guide Trouble Ticket # (if following-up on a previous call): Technician Name: Phone #: Model #: Serial #: Company Name: Location Name: City: State: Page 70 of 76 100513941 – Rev. W...

  • Page 71: Appendix

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 14. Appendix 14.1 Wiring Diagram Page 71 of 76 100513941 – Rev. W...

  • Page 72: Set Point Limits And Defaults

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 14.2 Set Point Limits and Defaults 14.2.1 System Adjustments Minimum Maximum Default Unit of Description Value Value Value Measurement System Pressure Outlet Pressure 0.30 (2.1) 7.5 (51.7) PSI (KPA) Alarm Delay 14.2.2 Alarm Set Points...

  • Page 73: Snmp Parameters

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 14.3 SNMP Parameters Device Configuration Information Device ID Alphanumeric (Defined by Customer) Device Model Alphanumeric (Factory Preset) Device Firmware Version Numeric (Factory Preset) Current Date/Time Numeric (mm/dd/yy hh:mm) IP Address Numeric (xxx.xxx.xxx.xxx) Subnet Mask Numeric (xxx.xxx.xxx.xxx)

  • Page 74: Limited Warranty Agreement

    Altec AIR parts will void the warranty on those Altec AIR products. Registration Reminder If you haven’t already done so, please take a moment to register your PUREGAS P210WLP Series Air Dryer. Registering is necessary to activate this Limited Warranty on your product.

  • Page 75: Contacting Altec Air

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 16. Contacting Altec AIR 16.1 General Altec AIR, LLC 226A Commerce Street Broomfield, Colorado 80020 (800) 521-5351 (303) 427-3700 Fax – (303) 657-2233 info@AltecAIR.com www.AltecAIR.com 16.2 Sales (800) 521-5351 (option 2) Fax –...

  • Page 76: Notes

    Altec AIR, LLC P210WLP Series Air Dryer User’s Guide 17. Notes ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ ________________________________________________________________________ Page 76 of 76 100513941 –...

This manual is also suitable for:

P210wlpP210wlp-vP212wlpP212wlv-v

Table of Contents