Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Longray 2610A2
Summary of Contents for Longray 2610A2
- Page 1 Longray User Manual Longray Basic Cold ULV Fogger with Adjustable Flow and Flex-Hose 2610A2 power switch carrying handle flow adjust knob pressure tank solution tank lid solution tank nozzle head © 2023 Longray. All rights reserved.
-
Page 2: Table Of Contents
Contents 1 Warnings 2 About your fogger 2.1 Overview ......2.2 Tech specs ......3 Operation 3.1 Prep . -
Page 3: Warnings
Warnings ˆ Do not turn the machine upside-down. ˆ After use, empty the solution tank and spray water 1-2 minutes to clear the solution pipeline. This is especially important for corrosive chemicals. ˆ When cleaning the machine, don’t splash water onto the motor and power switch. -
Page 4: About Your Fogger
AC powered. More powerful than battery-powered foggers, and quieter than gasoline-powered thermal foggers. Flow control. Use the flow control knob to adjust flow rate. (Droplets will also be slightly smaller at lower flow rates.) Tech specs Model 2610A2 Physical Capacity 1.1 gal Dimensions 17.5 x 15.0 x 8.5 in... -
Page 5: Operation
Operation Prep 1. Wear protective clothing/gloves/masks in accordance with safety regula- tions. 2. Check power cord insulation. 3. Make sure power switch is OFF. 4. Make sure flow adjust knob is at 0. 5. Add chemical into the tank, diluting if necessary, following the chemical manufacturer’s documentation. -
Page 6: Care And Maintenance
Care and maintenance Cleaning 1. Empty any chemical from the tank. 2. Clean the tank: add water, tighten the lid and shake. 3. Clean the solution pipeline: start the machine and spray 1-2 minutes. 4. Turn off the unit and empty the rinse water from the tank. Long-term Storage 1. -
Page 7: Troubleshooting
Troubleshooting Motor doesn’t start 1. Make sure power switch is ON. Motor starts, but no spray 1. Make sure the flow-rate adjust knob is not at 0. 2. Check the solution level in the tank. 3. Check the tank lid is tight. 4.
Need help?
Do you have a question about the 2610A2 and is the answer not in the manual?
Questions and answers