Warnings Do not turn the machine upside-down. After use, empty the solution tank and spray water 1-2 minutes to clear the solution pipeline. This is especially important for corrosive chemicals. When cleaning the machine, don’t splash water onto the motor and power switch.
Ergonomic design. Handheld nozzle, flex-hose, and carrying strap designed for comfort and efficiency. Flow control. Use the flow control knob to adjust flow rate. (Droplets will also be slightly smaller at lower flow rates.) Tech specs Model 2680A2 Physical Capacity 1.6 gal Dimensions 18.9 x 8.5 x 9.6 in...
Operation Prep 1. Wear protective clothing/gloves/masks in accordance with safety regula- tions. 2. Check power cord insulation. 3. Make sure power switch is OFF. 4. Make sure flow adjust knob is at 0. 5. Add chemical into the tank, diluting if necessary, following the chemical manufacturer’s documentation.
Care and maintenance Cleaning 1. Empty any chemical from the tank. 2. Clean the tank: add water, tighten the lid and shake. 3. Clean the solution pipeline: start the machine and spray 1-2 minutes. 4. Turn off the unit and empty the rinse water from the tank. Long-term Storage 1.
Troubleshooting Motor doesn’t start 1. Make sure power switch is ON. Motor starts, but no spray 1. Make sure the flow-rate adjust knob is not at 0. 2. Check the solution level in the tank. 3. Check the tank lid is tight. 4.