Cleaning And Care - HH Simonsen TRUE DIVINITY MK2 Manual

SAFETY INSTRUCTIONS AND WARRENTY
4.
without use.
5. To turn off the styler, press the power button.
6. Wait until the styler has cooled down before storing it.
Selecting the appropriate temperature
Your HH Simonsen styler has a fully adjustable temperature
control ranging from 160 to 230°C. Use '+' to increase the
temperature. It has three preset temperature settings; how-
ever, you may select other heat settings within this range.
The adjustable settings allow you to select the temperature
that works best for your individual hair type and condition.
Straightening:
1. Wash the hair, dry it and comb through well.
2. Apply a HH Simonsen protection product in damp hair.
3. Separate a two-inch section. The thinner the section, the
more intensive the straightening.
4. Carefully place the section between the heating plates.
6
5. Now drag the straightening iron from the hairline to the
end of the hair. Never rest for more than two seconds
in any one place (especially when using the hotter
settings).
6. Repeat the process with this section until the desired
effect is achieved.
7. Repeat step 3-5 with the remaining sections.
8. Turn off the styler and disconnect from the power supply
when you have finished the treatment.
9. Allow the styler to cool down completely before storing.
Creating curls:
1. Wash the hair, and comb through well.
2. Apply HH Simonsen Heat Protection Spray in damp hair,
and dry it.
3. Separate a two-inch section. The thinner the section, the
more intensive the result.
4. Place the straightening iron as close to the roots as
possible and slide through the hair slowly in a downward
motion, simultaneously twisting and turning the iron.
Tip: Do not curl too quickly. Curling each section once
and slowly will give a far better result than curling each
sections quickly multiple times.
Other styling options
Your HH Simonsen styler gives you unlimited styling options.
In addition to straightening and curling hair you can also
create flicks, twists, twirls and much more! And don't forget
that your HH Simonsen styler is perfect for men's styling too.

3. Cleaning and care

To ensure that your HH Simonsen product remains in good
working condition, clean the appliance regularly. This will
remove the residue of hair products that can
eventually coat the heating plates. Use a cotton cloth –
wrung in soap water if necessary – to clean the plates. Do
not use water.