Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ryobi RLM46160P
Summary of Contents for Ryobi RLM46160P
- Page 1 ORIGINAL INSTRUCTIONS Petrol Lawn Mower RLM46160P...
- Page 2 Important! It is essential that you read the instructions in this manual before assembling, maintaining, and operating the product. Subject to technical modifications.
-
Page 3: Intended Use
User Manual Safety, performance, and dependability have been given while operating the product may result in serious top priority in the design of your petrol lawn mower. personal injury. ■ Wear heavy, long trousers, long sleeves, and sturdy anti-slip footwear. Do not wear short trousers, sandals, INTENDED USE or go barefoot. -
Page 4: Lawn Mower Safety Warnings
User Manual children will remain where you last saw them. ■ Stop the engine and allow the blade to stop if the product has to be tilted for transportation when crossing ■ Keep children out of the mowing area and under the surfaces other than grass, and when transporting the watchful care of a responsible adult other than the product to and from the area to be mowed. -
Page 5: Residual Risks
User Manual slip-and-fall accident. smoking, and work practices are all thought to contribute to the development of these symptoms. There are measures ■ Allow engine to cool down before storing in any that can be taken by the operator to possibly reduce the enclosure. -
Page 6: Packing List
Fuel and its vapours are explosive and ■ If any parts are damaged or missing, please call your can cause severe burns or death. Ryobi service centre for assistance. Fuel and its vapors are extremely PACKING LIST flammable and explosive. Fire can cause severe burns or death. -
Page 7: Installation
User Manual ■ Use fresh fuel. WARNING ■ Store fuel in containers specifically designed for this The product safety systems or features shall not be purpose. tampered with or disabled. ■ Always refuel outdoors where there are no sparks and flames. - Page 8 User Manual To add engine oil: To set the blade height: ■ Ensure that the mower is level and area around oil cap/ ■ Stop the product and wait for the blade to come to a dipstick is clean. complete stop. ■...
-
Page 9: Spark Arrestor
User Manual ■ Always be sure of your footing. A slip-and-fall accident ■ Avoid using solvents when cleaning plastic parts. Most can cause serious personal injury. plastics are susceptible to damage from various types of commercial solvents and may be damaged by their ■... -
Page 10: Cleaning Air Filter
User Manual Replace a bent or damaged blade immediately. ■ The recommended torque for the disc bolt and blade lock nut is 35–45 Nm (26–33 ft. lb.). NOTE: Do not sharpen the blades, replace with new WARNING item. Blades need to be properly balanced to avoid Only use replacement blades approved by the damage and personal injury. -
Page 11: Spark Plug Maintenance
User Manual ■ Tip mower onto its side and allow oil to drain from the oil ■ Assemble the spat (hub cap). fill hole into an approved container. STORING THE PRODUCT ■ Place mower upright and refill with oil following the instructions in the Adding/Checking Oil section. - Page 12 User Manual ■ Clean all foreign materials from the product. Store the product in a cool, dry, and well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts. Do not store outdoors. ■...
-
Page 13: Product Specifications
User Manual PRODUCT SPECIFICATIONS Engine displacement 161cc OHV Type 4 stroke air cooled engine No-load speed of cutting 2800 min means Fuel consumption at Max. 1.1 kg/h Engine performance Specific fuel consumption at 395 g/kW.h Max. Engine performance Cutting width 46 cm Cutting height adjustment 7 positions, 25 mm - 75 mm... -
Page 14: Maintenance Schedule
User Manual MAINTENANCE SCHEDULE Every 12 months After 1st month Every 3 months Every 6 months Before or after 300 or 20 hours of or 50 hours of or 100 hours each use hours operation operation of operation of operation Check engine oil Change engine oil Check air filter... -
Page 15: Troubleshooting
User Manual TROUBLESHOOTING Problem Possible cause Solution The handle is not in The handle is positioned incorrectly. Check and ensure that the lower part of handle is pushed the correct position. fully back and snapped into proper position. The handle knobs are not tightened. Tighten the handle knobs. - Page 16 Imported by: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere Auckland, 2022, New Zealand 099923021014-01B...
Need help?
Do you have a question about the RLM46160P and is the answer not in the manual?
Questions and answers