Subscribe to Our Youtube Channel
Related Manuals for Electrolux Professional NeoBlue Touch L
Summary of Contents for Electrolux Professional NeoBlue Touch L
- Page 1 Undercounter dishwasher Touch button version Installation manual * 59566XR01- 2024.07 *Original instructions...
-
Page 2: Installation Diagram
Installation diagram... - Page 3 EI = Power supply entry D = Drain pipe with internal diameter: WI = Water Inlet pipe with ⌀ =3/4″ G fittings *[0-850 mm] — ⌀ = 20 mm (Only for model with drain pump) XD = Inlet pipe for detergents **[0-100 mm] —...
- Page 4 Foreword Read the following instructions, including the warranty terms before installing and using the appliance. Visit our website www.electroluxprofessional.com and open the Support section to: Register your product Get hints & tips of your product, service and repair information The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the appliance.
-
Page 5: Table Of Contents
Contents A SAFETY INFORMATION ......................... 7 General information ........................7 General safety ..........................7 Personal protection equipment ......................8 Safety signs to be placed on the appliance or near its area ..............8 Residual risks ..........................9 Transport, handling and storage ...................... 9 Installation and assembly ...................... - Page 6 PRIMING OF DETERGENTS ......................... 24 Detergent dispensers activation ..................... 24 J.1.1 Manual activation by control panel ..................24 J.1.2 Activation by “AppOne“ application..................25 K DISPENSERS SETTING ........................26 Dispenser parameters ......................... 26 Change a parameter value ......................26 Detergent and rinse aid parameters list ................... 27 L TROUBLESHOOTING ..........................
-
Page 7: Asafety Information
SAFETY INFORMATION General information To ensure safe use of the appliance and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators. -
Page 8: Personal Protection Equipment
– Appliance cleaning, repair and extraordinary maintenance – Appliance disposal – Work on electrical equipment Personal protection equipment Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the appliance's service life. Stage Protective Safety footwear Gloves Glasses... -
Page 9: Residual Risks
Danger Meaning danger of crushing hands caution hot surface danger of electrocution (shown on electrical parts with indication of voltage) Residual risks The appliance has several risks that were not completely eliminated from a design standpoint or with the installation of adequate protection devices. -
Page 10: Installation And Assembly
• Do not stand under suspended loads during loading or unloading operations. Unauthorized personnel must not enter the work area. • The weight of the appliance alone is not sufficient to keep it steady. • For appliance handling, do not lift and anchor it to movable or weak parts such as: casings, electrical raceways, pneumatic parts, etc. -
Page 11: A.11 Water Connection
Manufacturer Electrolux Professional SpA or any other Data plate position service centre authorised by Electrolux Professional SpA. The data plate is located on the front or side panel of the... -
Page 12: Appliance And Manufacturer's Identification Data
9.9 kW • 0 = 2800 W IPX4 • 1 = 4500 W Electrolux Professional spa - Viale Treviso, 15 - 33170 Pordenone (Italy) Plug type • 0 = no plug • 1 = Shuko plug (plug type F) • 2 = UK plug (plug type G) -
Page 13: B.11 Storage
B.11 Storage The place where the appliance is stored must: The appliance and/or its parts must be stored and protected • can take the appliance load, from damp, in a non-aggressive place, free of vibrations and • have a flat support surface to avoid deforming the appliance with room temperatures between -10℃... -
Page 14: Handling
• cover sharp edges; CAUTION • check the forks and lifting procedures according to the instructions given on the packing. The appliance must only be transported, handled and D.2.2 Shifting stored by specialised personnel, who must have: The operator must: •... -
Page 15: Positioning
Positioning • Remove the cardboard packaging. • With a lift truck, lift the equipment to move it to the place of installation. • Remove the two hex screws to unlock the appliance from the wooden pallet. • Install the 4 feet and level the appliance by turning the adjustable feet. -
Page 16: Disposal Of Packing
CAUTION Water connections During the washing cycles, small amounts CAUTION of steam may escape from the dishwasher Always use a new set of joints if you door. Protect all unsuitable materials remove and reinstall the water inlet pipe to exposed to the dishwasher steam and the appliance. -
Page 17: Hydraulic Circuits
Hydraulic circuits • Make sure the machine power supply voltage specified on the rating plate matches the mains voltage. • Make sure the system power supply is arranged and able to take the actual current load and that it is executed in a workmanlike manner according to the regulations in force in the country of use. -
Page 18: Terminal Board Of Single Phase Appliance
Safety devices E.8.2 Terminal board of single phase appliance Open the power supply terminal board. Using a suitable power • An automatic-reset overload protector incorporated in the supply cable (see C TECHNICAL DATA table) connect the electric pump windings cuts off the power to the pump in phase and neutral to terminals 1 and 4 respectively and the case of faulty operation. -
Page 19: Secondary Wash Cycle Icon
Icon status Control button colours (cont'd.) Icon blinks in The appliance suggest you to exe- The door is opened during Control button blinks in light yellow. cute a drain/self-cleaning cycle blue. the washing cycle. (available soon). Control button is flashing The washing cycle is Icon is on in white. -
Page 20: Hcommissioning
COMMISSIONING Preliminary checks, adjustments and • the upper and lower wash and rinse arms. operational tests WARNING These operations must only be carried out by specialised per- sonnel provided with adequate personal protection equipment (e. safety footwear, gloves, glasses, etc.), tools and suitable ancillary equipment with the appliance switched off and cold. -
Page 21: Iapp Connection
APP CONNECTION Intro 3. Check and complete the registration. IMPORTANT Minimum requirements for your smartphone: • Android operating system: 8.0 Oreo • Apple iOS: 16.4 To use all functionalities of your appliance it is necessary download and install on a smartphone device the “AppOne“ application available on Google Play and Apple Store (avail- able soon). - Page 22 2. Insert your credentials (email address and password) to 5. Touch “SEARCH NEARBY DEVICES“ button to find the authenticate your account (refer to I.2 Register into One appliance. After a few seconds, the display shows the Connected). appliance that you have to connect. NOTE! If you are not able to see any appliance, touch LOGIN TO...
-
Page 23: Login "Appone" After Authentication
7. Find the proper appliance from the possible list and touch 9. Touch the button in the lower part of the display, to view the button “CONNECT“ to connect the appliance with the the “LIVE STATUS“ of the appliance. smartphone application. For additional information about “LIVE STATUS“... -
Page 24: Jpriming Of Detergents
• From main menu, touch the “Appliance Overview“ tab. LIVE STATUS list (cont'd.) 09:05 Icon Appliance Short description Appliance overview status The appliance has finished Under Counter entry the heating phase and now is ready to work. Ready Undercounter Entry The application shows: •... -
Page 25: Activation By "Appone" Application
3. With the control button in green (the appliance is ready for 3. From main menu, touch the “Settings“ tab. use.), open the door. 09:05 Appliance overview Under Counter entry Undercounter Entry Appliance Overview Alerts Washing programs Settings Appliance connection 4. -
Page 26: Kdispensers Setting
09:05 7. To interrupt the operation touch the stop icon DISPENSERS SETTING Dispenser parameters • From “Settings“ menu, touch “Appliance parameters“ tab. NOTE! 09:05 You can change default parameters ONLY by Settings “AppOne“ application. • Switch the appliance on. PARAMETERS •... -
Page 27: Detergent And Rinse Aid Parameters List
2. Modify the factory value and touch “Done“ button. 3. The updated parameter is now put in evidence by a dark grey row. 09:05 Touch “Save“ button to confirm the change. Appliance parameters 09:05 Appliance parameters 38 s Initial detergent activation 40 s Initial detergent activation Initial rinse aid activation... - Page 28 Anomaly Type of Possible causes Actions anomaly The dishwasher does not Loss of No scrape action before putting Scrape dishes before putting them in wash well. performance. dishes in the racks the racks. The wash arms are clogged by Check if the wash jets are clogged by solid food remains.
-
Page 29: Malarms
Anomaly Type of Possible causes Actions anomaly Low pressure from rinse arms. Loss of The rinse arms are clogged. Clean the rinse arms. performance The water pressure after pressure Call service centre. reducer is less than 200 kPa [2 bar]. The wash pump does not Blocking The wash pump is clogged. -
Page 30: Alarm Details
Type of anomaly: 4. The smartphone display shows the active and solved alarm/warning list. • Warning 09:05 • Alarm Anomaly title Alerts Anomaly details Active • Anomaly code • Anomaly status: There are no active alerts. – Active – Solved Solved •... - Page 31 Anomaly Type of anomaly Possible causes Actions Warning Boiler temperature sensor out of order. Switch the appliance off and on. BOILER TEM- Not blocking Wrong parameters set. Call the service centre if alarm appears PERATURE again. TOO HIGH Warning Tank temperature sensor out of order. Switch the appliance off and on.
- Page 34 Electrolux Professional SPA Viale Treviso 15 33170 Pordenone www.electroluxprofessional.com...
Need help?
Do you have a question about the NeoBlue Touch L and is the answer not in the manual?
Questions and answers