Integrated Peripherals - Gigabyte GA-MA790XT-UD4P User Manual

2-6

Integrated Peripherals

OnChip IDE Channel
OnChip SATA Controller
OnChip SATA Type
x OnChip SATA Port4/5 Type
Onboard Audio Function
Onboard GSATA-II Ctrl
Onboard GSATA-II Ctrl Mode
Onboard LAN Function
Onboard LAN Boot ROM
 SMART LAN
Onboard 1394 Function
OnChip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Onboard Serial Port 1
: Move
Enter: Select
F5: Previous Values
OnChip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
OnChip SATA Controller
Enables or disables the integrated SATA controller. (Default: Enabled)
OnChip SATA Type (AMD SB750 South Bridge, SATA2_0~SATA2_3 connectors)
Configures the operating mode of the integrated SA TA controller.
Native IDE
RAID
AHCI
OnChip SATA Port4/5 Mode (AMD SB750 South Bridge, SATA2_4/SATA2_5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the
operating mode of the integrated SATA2_4/SATA2_5 connectors.
IDE
As SATA Type
Onboard Audio Function
Enables or disables the onboard audio function. (Default: Auto)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item
to Disabled.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that
support Native mode.
Enables RAID for the SATA controller.
Configures the SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing
and hot plug.
Disables RAID for the SATA controller and configures the SATA controller to
PATA mode. (Default)
The mode depends on the OnChip SATA Type settings.
[Enabled]
[Enabled]
[Native IDE]
[IDE]
[Enabled]
[Enabled]
[IDE]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
F10: Save
- 4 7 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup