The Main Menu (For Example: Bios Ver. : Faa) - Gigabyte GA-M57SLI-S4 User Manual

Startup Screen:
<TAB>:POST Screen <DEL>:BIOS Setup/Q-Flash <F9>:XpressRecovery2 <F12>:Boot Menu <END>:Qflash
<TAB> : POST Screen
Press the TAB key to show the BIOS POST screen.
(To show the BIOS POST screen at system startup, refer to the instructions on the Full Screen LOGO Show item on page 39.)
<DEL> : BIOS Setup/Q-Flash
Press the Delete key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.
<F9> : Xpress Recovery2
Press the F9 key to enter the Xpress Recovery2 screen.
<F12> : Boot Menu
Press the F12 key to enter Boot Menu to select the first boot device.
<END> : Qflash
Press the End key to access the Q-Flash utility directly without having to enter BIOS Setup first.

The Main Menu (For example: BIOS Ver. : FAa)

Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the
screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
MB Intelligent Tweaker(M.I.T.)
Esc: Quit
F8: Q-Flash
1. If you don't find the settings you want, press "Ctrl+F1" to access advanced options.
2. Select the Load Optimized Defaults item in the BIOS Setup when somehow the system
is not stable as usual. This action makes the system reset to the default settings for stability.
3. The BIOS Setup menus described in this chapter are for reference only and may differ from
the exact settings for your motherboard.
GA-M57SLI-S4 Motherboard
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
F10: Save & Exit Setup
Time, Date, Hard Disk Type...
- 34 -
F11: Save CMOS to BIOS
F12: Load CMOS from BIOS