Gigabyte GA-M56S-S3 User Manual page 74

Step 5:
Next, select the hard drives which you wish to be included in the disk array. The Free Disks block
displays the information about the SATA hard drives that are available for use as RAID array drives.
Press <Tab> to move to the Free Disks block. Select the target hard drives using the up or down arrow
key and use the right arrow key to add the hard drives to the Array Disks block (Figure 5).
RAID Mode: Striped
Free Disks
Port Disk Model
[ESC] Quit [F6] Back
Step 6:
After assigning the RAID drives, press <F7>. A message which says "All data on new(or added) disks
will be overwritten. Continue?" appears (Figure 6). To overwrite the data in the selected hard drives,
press <Y> or press <N> to cancel. (If the hard drives contain a previously created RAID array, you
need to press <Y> to clear the data in the hard drives.) If you confirm Yes to the prompt above, the "C
"Clear MBR?" prompt appears. Press <Y> to clear or <N> to abort. (We recommend that you clear the
MBR to reduce drive errors.)
RAID Mode: Striped
Free Disks
Port Disk Model
[ESC] Quit [F6] Back
GA-M56S-S3 Motherboard
MediaShield Utility Apr 20 2007
- Define a New Array -
Capacity
[ ] Add
[ ] Del
[F7] Finish [TAB] Navigate
Figure 5
MediaShield Utility Apr 20 2007
- Define a New Array -
All data on new(or added) disks will be overwritten. Contiune?
Capacity
Clear disk data ?
[Y] YES
[ ] Add
[Y] YES
[ ] Del
[F7] Finish [TAB] Navigate
Figure 6
- 74 -
Stripe Block: Optimal
Array Disks
Port Disk Model
1 ST3120026AS
2 ST3120026AS
[ ] Select [ENTER] Popup
Stripe Block: Optimal
Array Disks
Port Disk Model
1.0.M ST3120026AS
[N] NO
1.1.M ST3120026AS
[N] NO
[ ] Select [ENTER] Popup
Capacity
111.79GB
111.79GB
Capacity
111.79GB
111.79GB