CMX Master Guide
Introduction
Thank you!
For selecting a Firstech solution as your product of choice. The following manual is a complete Master
guide to the CMX universal Control Module and is intended for experienced and authorized Firstech
technicians only. If you need any further technical support, please call us at 888-820-3690 ext. 203 or
visit our website at
https://install.myfirstech.com
Caution: The Manufacturer's warranty will be void if this product is installed by, tampered
with, or modified by anyone other than an authorized Firstech dealer. Firstech provides
installation support services to authorized dealers only.
This manual may change frequently, please check
Kit Contents
All Firstech CMX controller kits include the following:
• Control Module w/simple wiring diagram
• High Current Ignition harness CN1
• 20 PIN I/O Wiring harness (gray connector) CN4
• 2 PIN SIREN output harness (brown connector) CN15
• Hood pin
NOTE: This kit does NOT include Firstech remotes, antennas, antenna cables, accessories, or feature
options table. Please visit
NOTE: Alarm features are disabled by default (please see feature 3-06 for options)
The following accessories are available but
• FT-LOCK including DM600/DM700 door lock modules
• Keyless entry pad (FT-KP2)
• Temperature sensor (FT-TEMP SENSOR) (Drone and 2 Way remote LCD systems)
• FT-SHOCK (2 stage impact sensor)
• DAS-II 4 in one sensor (2 stage impact, tilt, glass break, accelerometer) (required for manual
transmission applications)
The remote(s) and antenna are modular and are not specific to the control modules. You can pair almost any
Firstech remote(s) and antenna receiver to the CMX control module.
Any questions on contents please contact your distributor or us directly at 1.888.820.3690, Monday
through Friday, 7AM to 6PM Pacific Time.
Copyright 2022 Fi rstech , LLC.
https://install.myfirstech.com
not included
"Goonies never say die!"
https://install.myfirstech.com
for more information.
with every system:
CMX is the Solution
https://install.myfirstech.com
for updates.
Page 4
Need help?
Do you have a question about the CM-X and is the answer not in the manual?