Frequency/Voltage Control - Gigabyte GA-K8NS User Manual

2-7

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
CPU OverClock in MHz
AGP OverClock in MHz
K8 CPU Clock Ratio
CPU Voltage Control
VDDQ (AGP) Voltage Control
DDR voltage control
: Move Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power end-user use only.
CPU OverClock in MHz
200MHz ~ 455MHz
AGP OverClock in MHz
66MHz ~ 100MHz
K8 CPU Clock Ratio
Default
x4 800Mhz ~ x10 2000Mhz.Set K8 CPU Clock Ratio from x4 800Mhz to x10 2000Mhz.
CPU Voltage Control
Normal
+5%
+7.5%
+10%
VDDQ (AGP) Voltage Control
Normal
+0.1v
+0.2v
+0.3v
DDR voltage control
Normal
+0.1v
+0.2v
Frequency/Voltage Control
[200]
[66]
[Default]
[Normal]
[Normal]
[Normal]
+/-/PU/PD: Value F10: Save
F7: Optimized Defaults
Increase CPU frequency as user selected.
Increase AGP frequency as user selected.
Set K8 CPU Clock Ratio to CPU factory default. (Default value)
Set VDDQ(AGP) voltage as AGP required. (Default value)
Increase CPU voltage +5%.
Increase CPU voltage +7.5%.
Increase CPU voltage +10%.
Set VDDQ(AGP) voltage as AGP required. (Default value)
Increase VDDQ(AGP) voltage +0.1V.
Increase VDDQ(AGP) voltage +0.2V.
Increase VDDQ(AGP) voltage +0.3V.
Supply DDR voltage as DDR required. (Default value)
Increase DDR voltage +0.1V.
Increase DDR voltage +0.2V.
- 41 -
Item Help
Menu Level
ESC: Exit F1: General Help
BIOS Setup