Gigabyte GA-K8NS User Manual page 21

8) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will
blink when the system enters suspend mode.
9) BATTERY
Pin No.
1
2
3
1
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended
by the manufacturer.
Dispose of used batteries according to the manufacturer's
instructions.
If you want to erase CMOS...
1. Turn OFF the computer and unplug the power cord.
2. Take out the battery gently and put it aside for about 10
minutes (Or you can use a metal object to connect the positive
and negative pins in the battery holder to make them short for
one minute).
3. Re-install the battery.
4. Plug the power cord and turn ON the computer.
- 21 -
Definition
MPD+
MPD-
MPD-
Hardware Installation