Subscribe to Our Youtube Channel
Related Manuals for Westinghouse WSnow22
Summary of Contents for Westinghouse WSnow22
- Page 1 User Manual WSnow22 22-in. Snow Blower DO NOT RETURN THIS PRODUCT TO THE STORE If you have questions or need assistance, please call customer service at 855-944-3571.
- Page 2 State of California to cause cancer and birth coverage, it is important to defects or other reproductive harm. To minimize register your Westinghouse exposure, wear gloves or wash your hands frequently when servicing this equipment. For more information go product.
-
Page 3: General Safety Warnings
IMPORTANT! 5. Avoid body contact with earthed or grounded surfaces (i.e. upper and lower water pipes, radiators, ranges, Safety Instructions refrigerators, microwave ovens, and outer frames of heating equipment). Take necessary precautions to avoid electric shock. There is an increased risk of electric shock All Operators Must Read These if your body is earthed or grounded. -
Page 4: Electrical Safety
14. If, during use, you notice that the unit runs unstably or hear abnormal sounds from the motor, stop the WARNING machine, disconnect the power immediately and contact Westinghouse Outdoor Power Equipment (855) 944-3571. Electric shock may cause SEVERE INJURY or DEATH. Heed these warnings: Electrical Safety •... -
Page 5: Personal Safety
6. Body position – Maintain proper footing and balance the engine, immediately stop the machine, disconnect the at all times. Place heels firmly on the ground and tightly power, and contact Westinghouse Outdoor Power grasp the handle bar. Watch for uneven surfaces and do Equipment (855) 944-3571. -
Page 6: Safety Symbols
Safety Symbols The following table describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S Disconnect the plug before MANUAL(S) –... -
Page 7: Technical Data
Know Your Electric Snow Thrower Read the owner’s manual and safety rules carefully before operating your electric snow thrower. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. -
Page 8: Carton Contents
2. Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store. Please call Westinghouse Outdoor Power Equipment (855) 944-3571. NOTE: Do not discard the shipping carton and packaging material until you are ready to use your new electric snow thrower. -
Page 9: Discharge Chute Assembly
Fig. 3 Fig. 6 Extension cord restraint hook Chute clean-out Upper frame tool 6. Clip on the 3 cable clips on the frame, and insert the cable 4. Secure the connection of the upper frame to the middle frame by fastening the second set knobs and bolts on inside of the cable clips (Fig. - Page 10 3. Secure the lower chute crank in place with the hitch pin Fig. 9 (Fig. 12). Fig. 12 Hitch pin NOTE: Do not overtighten the knob. Chute Crank Assembly 4. Remove the other hitch pin from the lower chute crank 1.
-
Page 11: Operation
If the cord is damaged, do not use the snow thrower. Operation Replace or repair the damaged cord immediately. If you need assistance, contact Westinghouse Outdoor Power Equipment (855) 944-3571. NOTE: Before using this machine, make sure that the power... - Page 12 6. While moving the snow thrower, do not drag the power Fig. 19 cable violently or roughly. The snow thrower should move within the range that the cable can reach. On/Off switch 7. Do not push the snow thrower with excessive force. You should push the machine gently and evenly in Safety lock accordance with the unit’s throw rate.
- Page 13 Changing Throw Direction + Fig. 22 Throw Height WARNING! Never direct the discharge chute at the operator, at bystanders, at vehicles, or at nearby windows. The discharged snow and foreign objects accidentally picked up by the snow thrower can cause serious damage and personal injury.
-
Page 14: General Maintenance Tips
Maintenance Fig. 24 Nuts + Bolts WARNING! Make sure to turn off the switch and disconnect the extension cord before performing any maintenance task on your snow thrower. Lifetime Lubrication (Motor + Auger) Lubrication is not necessary and may damage the unit. The snow thrower is lubricated for lifetime use at the factory before shipment. - Page 15 Replacing the Scraper Bar 2. Lift the belt tension pulley and roll the worn belt up and off the big pulley from the top of the big pulley (Fig. 30). 1. The scraper bar is located at the base of the snow thrower beneath the rotor housing (Fig.
-
Page 16: Service & Support
Service + Support Fig. 32 If your Westinghouse electric snow thrower requires service or Belt tension maintenance, please call Westinghouse Outdoor Power pulley Equipment (855) 944-3571 for assistance. Belt Model + Serial Numbers When contacting the company, reordering parts, or arranging... - Page 17 Service Hotline (855) 944-3571 777 Manor Park Drive, Columbus, OH 43228 and Westinghouse are trademarks of Westinghouse Electric Corporation. Used under license by Westinghouse Outdoor Power Equipment. WSnow22 062624 Rev 01 © 2024 Westinghouse Outdoor Power Equipment, All Rights Reserved.
Need help?
Do you have a question about the WSnow22 and is the answer not in the manual?
Questions and answers