Integrated Peripherals - Gigabyte GA-EX58-UD4 User Manual

2-6

Integrated Peripherals

SATA RAID/AHCI Mode
SATA RAID/AHCI Mode
SATA Port0-3 Native Mode
SATA Port0-3 Native Mode
USB 1.0 Controller
USB 1.0 Controller
USB 2.0 Controller
USB 2.0 Controller
USB Keyboard Function
USB Keyboard Function
USB Mouse Function
USB Mouse Function
USB Storage Function
USB Storage Function
Azalia Codec
Azalia Codec
Onboard H/W 1394
Onboard H/W 1394
Onboard H/W LAN1
Onboard H/W LAN
Onboard H/W LAN2
Green LAN
 SMART LAN
Green LAN
 SMART LAN1
Onboard LAN Boot ROM
 SMART LAN2
Onboard SATA/IDE Device
Onboard LAN1 Boot ROM
Onboard SATA/IDE Ctrl Mode
Onboard LAN2 Boot ROM
Onboard Serial Port 1
Onboard SATA/IDE Device
Onboard SATA/IDE Ctrl Mode
 Smart Backup
: Move
: Move
Enter: Select
Enter: Select
F5: Previous Values
F5: Previous Values
SATA RAID/AHCI Mode (Intel ICH10R Southbridge)
Enables or disables RAID for the SA TA controllers integrated in the Intel ICH10R Southbridge or
configures the SATA controllers to AHCI mode.
Disabled
RAID
AHCI
SATA Port0-3 Native Mode
Specifies the operating mode of the integrated SA TA controllers.
Disabled
Enabled
USB 1.0 Controller
Enables or disables the integrated USB 1.0 controller. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
USB 2.0 Controller
Enables or disables the integrated USB 2.0 controller. (Default: Enabled)
USB Keyboard Function
Allows USB keyboard to be used in MS-DOS. (Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Integrated Peripherals
Integrated Peripherals
+/-/PU/PD: Value
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F6: Fail-Safe Defaults
Disables RAID for the SATA controllers and configures the SATA controllers to
PATA mode. (Default)
Enables RAID for the SATA controllers.
Configures the SATA controllers to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing and
hot plug.
Allows the SATA controllers to operate in Legacy IDE mode.
In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared
with other device. Set this option to Disabled if you wish to install operating
systems that do not support Native mode. (Default)
Allows the SATA controllers to operate in Native IDE mode.
Enable Native IDE mode if you wish to install operating systems that support
Native mode.
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Auto]
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Press Enter]
[Press Enter]
[Disabled]
[Press Enter]
[Enabled]
[Disabled]
[IDE]
[Disabled]
[3F8/IRQ4]
[Enabled]
[IDE]
[Press Enter]
F10: Save
F10: Save
- 5 3 -
Item Help
Item Help
Menu Level
Menu Level
ESC: Exit F1: General Help
ESC: Exit F1: General Help
F7: Optimized Defaults
F7: Optimized Defaults
BIOS Setup