Table of Contents
Advertisement
On-Chip Primary PCI IDE
Enabled
Enable onboard 1st channel IDE port. (Default v alue)
Disabled
Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled
Enable onboard 2nd channel IDE port. (Default v alue)
Disabled
Disable onboard 2nd channel IDE port.
On-chip SATA
Disabled
Auto
Manual
SATA Port0 Configure as
IDE Pri. Master
IDE Pri. Slav e
IDE Sec. Master
IDE Sec . Slav e
SATA Port0
SATA Port1
SATA Port1 Configure as
The v alues depend on SATA Port0 .
SATA RAID Function
Enabled
Disabled
GA-8IPE1000 Pro3 Motherboard
Disable SATA controller.
When no dev ice is plugged in IDE1 or IDE2, SATA controller w ill remap to IDE
controller. (Default Value)
Set SATA Mode manually.
Remap SATA Port 0 to IDE Pri. Master.
Remap SATA Port 0 to IDE Pri. Slav e.
Remap SATA Port 0 to IDE Sec. Master.
Remap SATA Port 0 to IDE Sec. Slav e.
SATA controller set to SATA port0. As this mode, it support by WinXP or
later OS only . (Default v alue)
SATA controller set to SATA port1. As this mode, it support by WinXP or
later OS only .
Enable SATA Raid function w hen SATA Mode set to SATA Port 0 & SATA
Port 1 only . (Default v alue)
Disable SATA Raid function.
- 46 -
Advertisement
Table of Contents
