Table of Contents
Advertisement
Quick Links
OPERATOR'S MANUAL
60V Lithium-Ion Cordless Commercial Series
Grass Trimmer
Model Number:
CBC7610P
Battery and Charger Sold Separately
WARNING: To reduce the risk of injury, the user must
read and understand the Operator's Manual before using this
product. Save these instructions for future reference.
Advertisement
Table of Contents
Related Manuals for SUNSEEKER CBC7610P
Summary of Contents for SUNSEEKER CBC7610P
- Page 1 OPERATOR'S MANUAL 60V Lithium-Ion Cordless Commercial Series Grass Trimmer Model Number: CBC7610P Battery and Charger Sold Separately WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference.
-
Page 2: Safety Symbols
READ ALL INSTRUCTIONS! READ & UNDERSTAND OPERATOR'S MANUAL WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are below: Lead from lead-based paints ... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate it. Safety Alert Indicates a potential personal injury hazard. Read& To reduce the risk of injury, user must read and Understand understand the operator’s manual before using this... - Page 4 Keep other people out of working area during operation. The Safe distance distance between the machine and bystanders should be at least 15 meters. Take the replaceable battery from the appliance before any extension, cleaning and servicing works. Danger of Danger of injury! Pay attention to objects being bounced injury back.
-
Page 5: Work Area Safety
GENERAL BATTERY-OPERATED POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. WORK AREA SAFETY Keep work area clean and well lit. - Page 6 Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. POWER TOOL USE AND CARE Do not force the power tool. Use the correct power tool for your application. The ...
-
Page 7: Safety Instructions For Grass Trimmer
LBC60140 CGB6055U LBC60280 CG768U(Use with onboard battery harness AH7608) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper ... -
Page 8: Important Safety Instructions
16.5 in / 42 cm Operating Temperature 32°F ~ 104 °F ( 0°C~40°C ) Storage Temperature -4°F~ 158 °F ( -20°C~70°C ) Sunseeker 3 Teeth Blade (10 in / 25.4 cm): sold separately, can work with the tool as brush cutter... -
Page 9: Packing List
Recommended Accessories PART NAME MODEL NUMBER Cutting Line (0.095 in / 2.4 mm twist line) Trimmer Head TECOMEC Trimmer Spool TECOMEC Trimmer Head Bump Feed Button TECOMEC 3 Teeth Blade (10 in / 25.4 cm) sold separately PACKING LIST PART NAME QUANTITY Bare tool Guard... - Page 10 Fig.1 1. MCDU (Multiple control display unit) 6. Guard 2. Battery Socket 7. Trimmer head 3. Main trigger & Lock off button 8. Allan key 4. Loop handle 9. Socket spanner 5. Shaft WARNING: Never operate the tool without the guard firmly in place. The guard must always be on the tool to protect the user.
- Page 11 GUARD Reduces the risk of injury from foreign objects flung backwards toward the operator and from contact with the cutting attachment. TRIMMER HEAD Steel blade on the guard that maintains the cutting line at the proper length. MAIN TRIGGER/LOCK-OFF TRIGGER Turns the tool ON and OFF;...
-
Page 12: Mounting The Guard
shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. If any part is damaged or missing, please return the product to the place of purchase. MOUNTING THE TRIMMER HEAD WARNING: Always wear gloves when mounting or replacing the guard. -
Page 13: Operation
Fig.4 MOUNTING AND ADJUSTING THE LOOP HANDLE Push the loop handle onto the shaft, push the upper and lower parts together, tighten the handle by rotating the loop handle knob in clockwise direction (Fig. 5&6). Fig.5 Fig.6 Loose the knob on handle so that you can easily move/rotate the loop handle to where you feel comfortable. - Page 14 fraction of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection that is marked to comply with ANSI Z87.1. or EN 166. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.
- Page 15 To disconnect from the battery, press the battery lock button on handle, pull the battery pack out from the socket. With backpack battery and adapter Put the adapter into the machine (Fig 8), adapter is sold separately. Fig 8 Assemble the backpack battery pack with the harness correctly (refer to backpack battery manual), backpack battery and harness are sold separately.
- Page 16 100 ft.(30m) away. Clear the area to be cut before each use. Remove all objects, such as rocks, broken glass, nails, wire, or string that can be thrown or become entangled in the cutting attachment. Check that you have eye protection, proper clothing and balanced footing. There still may be risk to bystanders from thrown objects.
- Page 17 Fig.11 To Stop Move the tool away from the cutting area and release the main trigger to stop the tool. Press the power button on MCDU to shut down the tool to avoid accidental starting. WARNING: Always remove the battery from the tool during work breaks and after finishing work. WARNING: Make sure that the display screen is OFF before next use to avoid serious personal injury.
-
Page 18: Line Replacement
Tips for best trimming results Fig 13 (Fig.13) The correct angle for the cutting attachment is parallel to the ground. Do not force the trimmer. Allow the very tip of the line to do the cutting (Especially along walls). Cutting with more than the tip will reduce cutting efficiency and may overload the motor. -
Page 19: Maintenance
Place the trimmer line end through the metal position part, align the upper cover to spool retainer, and push them hard until you hear a clear “click” sound (Fig.16&17) Fig.16 Fig.17 NOTICE: Always thoroughly clean the spool retainer and upper cover before reassembling the trimmer head. - Page 20 may result in serious personal injury. WARNING: When cleaning the tool, DO NOT immerse it water or other liquids. CLEANING Remove the power plug from the tool. After each use, clear the debris, clogged soils, grass on the blade or the guard or the ...
-
Page 21: Transporting And Storing
described below after every 50 hours operation. Remove the sealing screw on the gear case with the provided Allen key and apply the grease into the oil hole up to 0.011lb (5g) (Fig. 18). DO NOT FULLY FILL THE GEAR CASE WITH THE GREASE The grease should meet the following requirements: NLGI Grade Penetration: ... -
Page 22: Troubleshooting
TROUBLESHOOTING PROBLEM CAUSE SOLUTION Stop the grass trimmer, disconnect the The drive shaft or trimmer power cord and then clean the drive shaft head is bound with grass. or the trimmer head thoroughly. Disconnect the power cord and replace There is not enough line on with new cutting line;... - Page 23 ERROR ALARM CAUSE SOLUTION INDICATO Contact the service point for a professional The controller voltage wrongly consultant or repairing. starting Release the switch, and restart in the right way. Over currency Release the switch. Low speed protection, blade Release the switch. blocked The controller temperature Release the switch, wait the machine...
Need help?
Do you have a question about the CBC7610P and is the answer not in the manual?
Questions and answers