Table of Contents
Advertisement
Introduction of audio connectors:
You may connect CD-ROM/DVD-ROM, walkman or
others audio input to Line In.
The front channels or earphone can be connected to
Line Out (Front Speaker Out).
Connect microphone to Mic In.
Connect the rear channels to Rear Speaker Out.
Connect the Center/Subwoofer channels to Center/
Subwoofer Speaker Out.
Connect the side channels to Side Speaker Out.
The installation of audio software for Windows 2000/ XP is very simple. Please follow the steps to install the
function.(Following pictures are in Windows XP)
If you set the Front Panel Type option to HD Audio in BIOS, make sure to connect your audio
front panel cable(optional for different models) connector to the motherboard before system
start-up or you'll not be able to see the front panel options from the Sound Effect application.
Stereo Speakers Connection and Settings:
We recommend that you use the speaker with amplifier to acquire the best sound effect if the stereo output
is applied.
STEP 1:
Connect the stereo speakers or earphone to "Line
Out".
STEP 2 :
Following installation of the audio driver, you find a
Sound Effect
icon on the lower right hand taskbar.
Click the icon to select the function.
4-1-4 2- / 4- / 6- / 8- Channel Audio Function Introduction
This motherboard provide 6 audio connector. You are able to use 2-/
4-/6-/8-channnels audio feature by audio software selection.
(Front Speaker Out)
- 67 -
Line In
Rear Speaker Out
Line Out
Center/Subwoofer
Speaker Out
Side Speaker
Mic In
Out
Line Out
Appendix
Advertisement
Table of Contents
