VEVOR YT60234 Quick Start Manual
Hide thumbs
Also See for YT60234:
- Manual (64 pages) ,
- Operation instruction (3 pages) ,
- Manual (734 pages)
Advertisement
Quick Links
Quick Start Guide
①INSTALLING THE MOUNTING POLE
Secure the sensor onto a mounting pole (included) using the screws (included).
②INSTALLING THE MOUNTING BRACKET
Secure the sensor onto a mounting bracket (included) using the screws (included).
③INSTALLING WIND SPEED CUPS
Align the screw holes in the wind speed cups with the flat, vertical side of the metal rod.
Insert the wind speed cups in the metal rod and screw on tight to lock it in place.
④INSTALLING WIND DIRECTION VANE
Align the screw holes in the wind direction vane with the flat, vertical side of the metal rod.
Insert the wind direction vane in the metal rod and screw on tight to lock it in place.
⑤SETTING UP RAIN COLLECTOR
Insert the funnel in the rain collector and lock it in place.
⑥INSTALLING THE BATTERIES
Unscrew the battery door at the bottom. Connect the cable of the rechargeable battery pack.
Adjust the connected cables so they fit comfortably in the compartment.
Close and fasten the battery door.
⑦ADJUSTING THE SOLAR CELL
Loosen the screw at the joint. Adjust the vertical angle of the solar cell.
Push the gear inward and tighten the screw.
Point to
NORTH
Point to
SOUTH
Point to
SOUTH
Lock
Align
Point to
NORTH
Point to
NORTH
Point to
SOUTH
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VEVOR YT60234
Summary of Contents for VEVOR YT60234
- Page 1 Lock Quick Start Guide Align ⑤SETTING UP RAIN COLLECTOR ①INSTALLING THE MOUNTING POLE Insert the funnel in the rain collector and lock it in place. Secure the sensor onto a mounting pole (included) using the screws (included). ⑥INSTALLING THE BATTERIES ②INSTALLING THE MOUNTING BRACKET Unscrew the battery door at the bottom.
- Page 2 ⑧MOUNTING THE WIRELESS 7-IN-1 OUTDOOR SENSOR SETTINGS Various options to install. Make sure the rain collector faces north and SETUP ADVANCED the solar panel faces south before fastening the screws (included). Select setup UI display language Language： English If you are a user located in the Southern Hemisphere, Wi-Fi Router Setup please reverse the direction.
Need help?
Do you have a question about the YT60234 and is the answer not in the manual?
Questions and answers
I need a replacement power cord for vevor model YT60234
The VEVOR model YT60234 uses an input of 100–240V AC, 50/60 Hz, 0.4A and an output of 5.0V DC, 1000 mA, 5W. You can find a replacement power cord by looking for a compatible 5V DC, 1A power adapter with the same connector type. Make sure it meets these specifications.
This answer is automatically generated
reset button