ION BLOCK ROCKER ICON User Manual page 8

Balancing Your Levels
This process shows how you can quickly balance your microphone signal(s) and
the signal from your Source Device (Bluetooth, Aux, USB).
1. Press the Power button to turn on Block Rocker® Icon. Connect your
preferred Bluetooth, Aux device, or USB drive.
2. Using the Volume +/- buttons on the speaker, set the volume to around 5 or
lower while balancing your levels. This will allow you to set your levels to a
clear and audible level without being overpowering. You can adjust it again
later once a balance has been achieved.
3. Set the Mic In volume using the Mic +/- buttons on the speaker. Set the level
to 10 as a starting point if you're unsure.
4. Now, set the volume on your Aux source device (Smartphone, tablet, etc.) to
100%. This will guarantee a strong signal.
5. Start playback on your device and adjust the Volume +/- buttons on the
speaker until it reaches a clear and audible level. If you are using a
microphone, set the Mic +/- volume level to where you can still hear the
microphone above the music.
For specific troubleshooting steps, please see the
ION Audio Block Rocker Icon User Guide
®
Troubleshooting section.
8