Gateway 18-inch User Manual page 35

Image Adjust
Setup Menu
PIP Menu
H/V Position. Adjusts the horizontal and vertical
screen position.
H Size. Adjusts the horizontal screen size.
Fine Tune. Adjusts the delay time.
Sharpness. Adjusts the amount of detail
enhancement.
OSD Position. Adjusts the position of the OSD
within the display image.
OSD Timeout. Specifies the number of seconds
the OSD menu is displayed before it turns off
automatically.
When PIP is turned on, you can display two
pictures at one time. The picture on the full
screen is the main picture. The picture in the
window is the sub-picture.
PIP mode only works when the picture displayed
on the full screen comes from the RGB video
input.
The sub-picture video input source can be set to
the TV/CATV, S-Video, AV, or YPbPr (component
video).
PIP Source. Changes the video input source of
the sub-picture when PIP is turned on.
PIP H/V Position. Moves the sub-picture within
the display image.
www.gateway.com
Using the OSD
31