Using coaxial (RF) audio and video (VCR only)
To connect your VCR using coaxial (RF) audio and video:
1
Connect the "output to TV" (RF out or Antenna out) jack on the back of
your VCR to the TV In connector on the back of your LCD TV.
2
Press the
If you have an off-air antenna or cable box, connect your off-air antenna or
cable TV cable to the ANT connector on the back of your VCR.
Warning
button on the remote control repeatedly to select
INPUT
If an outdoor antenna or cable system is connected to your
LCD TV, make sure that the antenna or cable system is
correctly grounded. For more information, see "Television
antenna connectors protection (for systems fitted with
TV/cable TV tuner cards)" on page 47.
www.gateway.com
Connecting your VCR or video camera
.
TV
23