INSTALLATION 1.0 LOCATION The cabinet must not be tilted. If necessary, some models may be tilted to the side indicated on the packaging. If not, it cannot be tilted. You must wait for at least 2 minutes from standing the cabinet up before starting it up.
1.2 GENERAL CONNECTION Before connecting the cabinet to the socket, check that the network voltage and frequency correspond to those indicated on the appliance's nameplate. It is essential that the electrical installation where the cabinet is going to be connected has an EARTHING SOCKET, in addition to the appropriate magneto-thermal switch and differential protection (we recommend 30 mA) Check that the section of the electricity socket is appropriate for the consumption it is going to...
GENERAL MEASUREMENTS ON THE OUTSIDE OF ALL THE CABINETS AND EMERGENCY DRAINAGE ANNOTATION IN MM MODEL DIMENSIONS SNACK LENGTH DEPTH HEIGHT HD706/R2, HE706/R2 2067 HD1412/R2, HE1412/R2 1388 2067 EMERGENCY DRAINAGE INSTALMENT MEASUREMENTS START-UP Once the inside of the cabinet is clean, plug it into the electricity network and turn the switch to On or I.
WARNING: The appliance contains in the refrigerant circuit propane (R290) or isobutane (R600a), a highly environmentally compatible natural gas that is inflammable. While transporting and installing the appliance ensure that no parts of the refrigerant circuit are damaged. Procedure if the refrigerant circuit is damaged: avoid open fire and ignition sources at all costs ensure that the room in which the appliance is located is well ventilated WARNING: In order to reduce flammability hazards, installing this device must be made...
The minimum temperatures so that the food does not start to deteriorate are: Type of unit Minimun temperature in the product Refrigeration + 10 C Frozen food maintenance - 15C Precautions 1) Stability is guaranteed, even with the doors open, although it is totally prohibited to lean on them.
Check that the room temperature is not above +38 ºC, the appliance's maximum operating temperature. Check that the goods load is perfectly positioned and does not obstruct the outlets of the inner fan, and that the time it has been inside is sufficient to cool the products. ...
Need help?
Do you have a question about the Profi Line HD706/R2 and is the answer not in the manual?
Questions and answers