X-Vision Optics XANB10 Quick Start Manual page 2

Helpful Tips
Night vision does not work through glass. The glass will
reflect the IR light emitted from the device
To see in the dark, press the IR button to ensure that IR is
turned on
There are multiple IR levels (press the IR button repeatedly
to cycle through 4 levels of 850nm illumination)
The higher the IR setting, the further you will see in the dark
ALWAYS make sure to turn off your binoculars when not in
use.
You can adjust auto shut-off time under settings.
X-VISION OPTICS | 5140 MOUNDVIEW DR. | RED WING, MN 55066