TP-Link TD-W8960N User Manual page 30

Note:
If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.
7. On the next screen you will see the detailed settings you've made. Please click the
Apply/Save button to save these settings.
8. On the next screen you will see the WAN Port Information Table with the new configuration.
Remove: Select the check box in the table above and then click Remove, the corresponding
interface will be deleted in the table.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide
Figure 4-13
Figure 4-14
23