TP-Link TD-W8950ND User Manual page 23

TD-W8950ND
I. By PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
Method One: Hardware push button.
Step 1: Press the QSS button on the front panel of the Router.
Step 2: Press and hold the QSS button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen of adapter appears. Click Finish to complete the
QSS configuration.
Method Two:
Step 1: Press the QSS button on the front panel of the Router.
Step 2: For the configuration of the wireless adapter, please choose "Push the button on my
access point" in the configuration utility of the QSS as below, and click Next.
150Mbps Wireless Lite N ADSL2+ Modem Router User Guide
Figure 4-3
16