The purpose of this document is to provide a description of Ximea accessories and to describe the correct way to install related software, drivers and run it successfully. Please read this manual thoroughly before operating your new Ximea accessories for the first time. Please follow all instructions and observe the warnings.
General description Figure 1: isometric view of ADPT-MX-X4G3-FF-X4G3-SFF Adapter connecting target FireFly X4 interface to SFF host PCIe Gen3 x4 bandwidth. Link Speed 32 Gb/s For use with xiX family camera series (equipped with FireFly X4 connector) XIMEA Technical Manual, Version: v240902...
Figure 2: dimensional drawing Width [ W ] Height [ H ] Depth [ D ] Mass [ M ] Material and technology 69.8 mm 59.8 mm 21.5 mm 122.9 g Machined Aluminum alloy Table 1: parameters XIMEA Technical Manual, Version: v240902...
NOTE: It is important that the power is turned off when inserting/detaching the cable. General ESD precautions need to be applied. Failing this requirement may lead to camera damage. host PC with supported SFF host adapter card (e.g. Ximea HA-2P-X4G3-SFF-X4G3) inside SFF-8644 fiber optic cable (e.g. Ximea CBL-SFF-X4G3-10M0)
Need help?
Do you have a question about the ADPT-MX-X4G3-FF-X4G3-SFF and is the answer not in the manual?
Questions and answers