The purpose of this document is to provide a description of Ximea accessories and to describe the correct way to install related software, drivers and run it successfully. Please read this manual thoroughly before operating your new Ximea accessories for the first time. Please follow all instructions and observe the warnings.
General description Figure 1: isometric view of XC-X4G3-MTP-X4G3-IPASS PCIe Gen.3 x4 iPass to MTP converter Link Speed 32 Gb/s Adapter for connection of iPass camera port to MTP fiber optics cable. Then PCUO cable (from Samtec) can be used between two MTP connectors can be used as connection.
Dimensional drawings Figure 2: dimensional drawing of XC-X4G3-MTP-X4G3-IPASS Width [ W ] Height [ H ] Depth [ D ] Mass [ M ] 24 mm 114.9 mm 16.8 mm 52 g Table 1: mechanical parameters of XC-X4G3-MTP-X4G3-IPASS XIMEA Technical Manual, Version: v240830...
Ensure the PC is turned off and unplugged from the power source and then deploy the host adapter to the PC Step 2. Connect the MTP cable to the XC-X4G3-MTP-X4G3-IPASS adapter Step 3. Option A: Connect the MTP cable to the computer Option B: Connect the MTP cable to the connected device (e.g., the camera)
Need help?
Do you have a question about the XC-X4G3-MTP-X4G3-IPASS and is the answer not in the manual?
Questions and answers