Advertisement

Quick Links

LR8BADEN
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LR8BADEN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AEG LR8BADEN

  • Page 1 LR8BADEN User Manual Washing Machine USER MANUAL...
  • Page 2: Table Of Contents

    9. BEFORE FIRST USE..................21 10. PROGRAMMES....................21 WI-FI - CONNECTIVITY SETUP..............27 12. DAILY USE....................... 30 13. HINTS AND TIPS....................36 14. CARE AND CLEANING..................37 15. TROUBLESHOOTING..................44 16. CONSUMPTION VALUES................48 17. QUICK GUIDE....................50 18. ENVIRONMENTAL CONCERNS..............52 My AEG Care app...
  • Page 3: Customer Care And Service

    ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 4 Children between 3 and 8 years of age and persons • with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept •...
  • Page 5: Safety Instructions

    ENGLISH The appliance must be connected to the water mains • using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. • If the mains power supply cable is damaged, it must •...
  • Page 6: Water Connection

    2.4 Use to a grounding connection in the building. • Always use a correctly installed WARNING! shockproof socket. Risk of injury, electric shock, • Make sure that the parameters on the fire, burns or damage to the rating plate are compatible with the appliance.
  • Page 7: Product Description

    PODS®, equipped with a system effectiveness of the stain remover. able to spread and mixing the • The AEG Steam Fragrance, thanks detergent in an optimal way, and to to the steam programmes offers the dissolve the detergent residues after perfect solution for refreshing even each cycle.
  • Page 8: Appliance Overview

    3.2 Appliance overview 11 12 Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate Hose support Drain pump filter Feet for levelling the appliance The rating plate reports: A. QR code Mod.
  • Page 9: Installation

    ENGLISH Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against mois‐ ture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 10 bar (1.0 MPa) Cold water Water supply Maximum Load...
  • Page 10: Positioning And Levelling

    5. Carefully put the appliance down on It is possible to see its rear side. water flowing from the 6. Put the front polystyrene packaging drain hose. This is due element on the floor under the to the testing with water appliance.
  • Page 11: The Inlet Hose

    If you install the appliance on a plinth adjust the level. that is not an accessory supplied by AEG, secure the appliance with the fixing plates. This spare part is available in web shop or from authorised dealer. Read carefully the instructions supplied with the accessory.
  • Page 12: Water-Stop Device

    The red sector in the window «A» shows this fault. WARNING! If this occurs, close the water tap and The inlet water shall not contact the authorized service centre to exceed 25 °C. replace the hose. CAUTION! 5.6 Water drainage Make sure that there are no leaks from the couplings.
  • Page 13: Electrical Connection

    ENGLISH 5.7 Electrical connection • Connect the drain hose to the spigot and tighten it with a clamp. At the end of installation you can connect • Position the hose directly to a built-in the mains plug to the mains socket. drain pipe in the room wall and tighten it with a clamp.
  • Page 14: Control Panel

    6. CONTROL PANEL 6.1 Control panel description The options are not selectable with all washing programmes. Check the compatibility between options and washing programmes in the "Options compatibility with programmes" paragraph in the "Programmes" chapter. An option can exclude another one, in this case the appliance doesn't allow you to set the incompatible options together.
  • Page 15 ENGLISH 6.2 Display Door locked indicator. Washing phase indicator. It flashes during pre-wash and wash phase. Rinsing phase indicator. It flashes during rinse phase. Spinning and draining phase indicator. It flashes during spin and drain phase. Steam phase indicator. Anti-crease phase indicator. Eco programme indicator: it lights on when the selected programme and options have an eco profile.
  • Page 16 The digital indicator can show: • Programme duration (e. g. The time shown when the programme is set could not correspond to effective duration and change af‐ ter ProSense phase. • Maximum load. • Finish in time (e. g.
  • Page 17: Dial And Buttons

    ENGLISH 7. DIAL AND BUTTONS 7.1 On/Off 7.4 Introduction Pressing this button for a few seconds The options/functions are allows to activate or deactivate the not selectable with all appliance. Two different tunes sound washing programmes. while switching the appliance on or off. Check the compatibility between options/functions As the Stand-by function automatically...
  • Page 18: Plus Steam

    7.7 Finish In The option remains active also for next cycles until it is deactivated and if it is Set this option as last after selectable with the set programme. programme and other 7.10 Plus Steam options selection, otherwise...
  • Page 19: Extra Rinse

    ENGLISH 7.11 Extra Rinse This option is not available with a With this option you can add a few rinses temperature lower than to the selected washing programmes and 40 °C. optimise the fabric softener distribution • Prewash and improve the fabric softness. Use this option to add a prewash It is suggested when you use the fabric phase at 30 °C before the washing...
  • Page 20: Settings

    In some programmes the The rinses phase uses more water for rinses are performed with more water. some washing programmes The display shows the indicator The appliance empties the The door stays locked. The drum water out automatically after turns regularly to reduce creasing.
  • Page 21: Factory Defaults

    10.1 My AEG Care app and additional hidden programmes My AEG Care app provides you with a wide choice of additional hidden programmes. Connect the appliance to My AEG Care and you will be able to choose the programme that suits your needs most.
  • Page 22: Programme Chart

    Sportswear Bed Linen Denim Machine Clean Daily Training Curtains Silk 1 Item Fast Down Jackets Pillow Baby Anti-Allergy Vapour Soccer/Rugby Towels Linen Easy Iron Skiing Gear Duvet Business Shirts Running Shoes Pet Hair Steam Cashmere 10.2 Programme Chart The programmes are described in this chart following the order of the selector dial from the top to the bottom.
  • Page 23 ENGLISH Programme Programme description Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or in‐ ner insulation.
  • Page 24 Programme temperature, maximum spin speed and maximum load Programme Default tempera‐ Reference spin Maximum load ture speed Temperature Spin speed range range 30 °C 1600 rpm 5.0 kg 60 °C - 30 °C 1600 rpm - 400 rpm PowerClean 59min 1600 rpm 9.0 kg...
  • Page 25 The fragrance (AEG Steam Fragrance) The AEG Steam Fragrance allows you to refresh even your delicate clothes, 10.4 Woolmark Wool Care - Green The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as «hand wash»...
  • Page 26 10.5 Options compatibility with programmes Additional programmes and settings are available downloading the APP. Spin ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Rinse Hold ■ ■ ■...
  • Page 27: Wi-Fi - Connectivity Setup

    QR code can be used in two ways: Frequency 2.412 - 2.472 GHz • Scan the QR code with the built-in for European mar‐ camera app to download the My AEG Care application from the App store on your smart device and follow the Protocol IEEE 802.11b/g/n required steps.
  • Page 28 The access point will be open for about 3 Your email and password. If you do minutes. not have an account, create a new 5. Configure the My AEG Care app on one following the instructions in My your smart device and follow the AEG Care.
  • Page 29: Remote Start

    ENGLISH 1. Touch the Remote Start button and the indicator blinks on the display for a few seconds. Every time you switch the appliance on, the appliance takes about 10 seconds to connect to the network 2. Touch the Start/Pause button to automatically.
  • Page 30: Daily Use

    11.6 Wi-Fi Always On It is possible to turn the appliance on by pressing the On/Off button or through the The Wi-Fi Always On function is App. available in the App. The Wi-Fi Always On This function keeps the appliance...
  • Page 31 ENGLISH 12.3 Filling the detergent and After a washing cycle, if additives necessary, remove any detergent residue from the detergent dispenser. Proceed as follows 1. Open the detergent dispenser. - Compartment for detergent pods (Max 2 pods). When using detergent tab‐ lets, make sure that the Pods®...
  • Page 32: Starting A Programme

    (only for a few seconds), the default temperature, the default spin speed and the washing phase indicators (when available). 2. To change the temperature and/or the spin speed, touch the related buttons. 3. If desired, set one or more options by touching the related buttons.
  • Page 33: The Prosense Load Detection

    ENGLISH To change or cancel this In case of in case of option: drum overload, the maximum declared load 1. Switch the appliance off by means of indicator comes on again the On/Off button. with the indicator 2. Switch the appliance on again. blinking.
  • Page 34: Interrupting A Programme And Changing The Options

    When the phase ends the relevant If the ProSense phase is indicator stops flashing and is steady on. already carried out and the The next phase indicator starts flashing. water filling is already started, the new programme starts without repeating the E.g.
  • Page 35: Draining Water Out After End Of Cycle

    ENGLISH acoustic signals operate (if they are 2. Touch the Start/Pause button: active). • If you have set , the appliance In the display all washing phase drains the water and spins. indicators become steady and the time • If you have set , the appliance area shows .
  • Page 36: Hints And Tips

    13. HINTS AND TIPS WARNING! Refer to Safety chapters. 13.1 The laundry load • Divide the laundry into: white, coloured, synthetics, delicates and wool. • Follow the washing instructions on the • Empty pockets and unfold the items. laundry care labels.
  • Page 37: Ecological Hints

    ENGLISH • Use only detergents and other • inadequate rinsing, treatments specially made for • a greater impact for the environment. washing machines. First, follow these 13.4 Ecological hints generic rules: – powder detergents (also tablets To save water, energy and to help and single-dose detergents) for all protect the environment, we recommend types of fabric, excluding delicate.
  • Page 38: Removing Foreign Objects

    14.4 Descaling Maintenance wash Once a month If the water in your area is Clean door seal Every two months hard or medium hard, we recommend that you use a Clean drum Every two months water softener for washing machines.
  • Page 39: Cleaning The Drum

    ENGLISH 4. Add a manually small quantity of powder detergent or a specific product into the empty drum, in order to rinse out any left residues. Occasionally, at the end of a cycle the display may show the icon : this is a recommendation to perform the “drum cleaning”.
  • Page 40 4. Wash the detergent dispenser and 7. Make sure that all detergent residue any insert under running water. is removed from the conveyor. Use only soft damp clothes. 8. Put bottom cover back to its position by aligning its holes on drawer hooks as indicated in the picture.
  • Page 41: Cleaning The Drain Pump

    ENGLISH • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code CLICK WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot.
  • Page 42: Cleaning The Inlet Hose And The Valve Filter

    11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages. 5. When the bowl is full of water, turn the filter back and empty the container.
  • Page 43: Emergency Drain

    ENGLISH occasionally to remove any deposit, collected over the time: 1. Remove the inlet hose from the tap and clean the filter. 45° 20° 14.11 Emergency drain If the appliance cannot drain the water, carry out the same procedure, described 2.
  • Page 44: Troubleshooting

    15. TROUBLESHOOTING WARNING! Refer to Safety chapters. 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check.
  • Page 45 ENGLISH • Make sure that the sink spigot is not clogged. • Make sure that the drain hose has no kinks or bends. The appliance does • Make sure that the drain filter is not clogged. Clean the filter, if not drain the water.
  • Page 46 Problem Possible solution • Set the spin programme. If the drain programme is not availa‐ The spin phase does ble in the programme dial, it can be set via App’. not operate or the • Make sure that the drain filter is not clogged. Clean the filter, if washing cycle lasts necessary.
  • Page 47: Emergency Door Opening

    ENGLISH Problem Possible solution • Make sure that the wireless signal reaches the appliance. Try to move the home router as near the appliance as possible or The App cannot fre‐ consider purchasing a wireless range extender. quently connect to the •...
  • Page 48: Consumption Values

    Before opening the door: 1. Press the On/Off button to switch the appliance off. CAUTION! 2. Disconnect the mains plug from the Risk of burns! Make sure mains socket. that the water temperature 3. Open the filter flap. is not too high and the 4.
  • Page 49 ENGLISH Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.
  • Page 50: Quick Guide

    Programme Litres hh:mm °C Cottons 0.350 80.0 03:10 44.00 20.0 1600 20°C Synthetics 0.800 50.0 02:25 35.00 40.0 1200 40°C Delicates 0.300 45.0 01:10 35.00 30.0 1200 30°C Wool 0.250 65.0 01:05 30.00 30.0 1200 30°C 1) Reference indicator of the spin speed.
  • Page 51: Cleaning The Drain Pump Filter

    ENGLISH 17.2 Cleaning the drain pump filter 180˚ Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description Cotton and synthetic items. This programme 5.0 kg ensures a good washing performance in a PowerClean 59min short time.
  • Page 52: Environmental Concerns

    Programmes Load Product description All fabrics, except woollens and very delicate 9.0 kg fabrics. Programme for rinsing and spinning. Rinse To spin the laundry and to drain the water in 9.0 kg the drum. All fabrics, except woollens and del‐...
  • Page 56 My AEG Care app The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)

Table of Contents