Related Manuals for Tre Modular Replicant ADSR
Summary of Contents for Tre Modular Replicant ADSR
- Page 1 Tre Modular - Replicant ADSR User Manual Thank you for choosing the Modular Replicant ADSR Eurorack module! This guide will walk you through features, usage of the Replicant ADSR.
- Page 2 Initial LVL - Initial level control sets the point where the envelope starts and ends. If usually envelopes start at 0v then Replicant ADSR can start anywhere from -5v to 0v. This allows you to precisely set how closed or open the module that you are controlling is in its initial state before and after the envelopes active stage.
-
Page 3: Specifications
ADSR. On the envelope side you adjust the range that the envelope operates in with Initial level and Attack level controls. Multi Stage D/R - Replicant ADSR, same as CS80 envelopes, has multi stage decay and release. It means that for a set amount of time it will drop faster and then start to drop slower. -
Page 4: Installation
Controls: Attack: Sets the length of the attack stage. Decay: Sets the length of the decay stage. Sustain : Sets the sustain level. Release: Sets the length of the release stage. Initial LVL: Sets the start and end point of the envelope. Attack LVL: Sets the height of the attack stage. -
Page 5: Additional Information
Additional Information: For any additional questions or support, please contact Tre Modular at support@tremodular.com Happy patching!
Need help?
Do you have a question about the Replicant ADSR and is the answer not in the manual?
Questions and answers