Operation - With Mobile Telephone - Jabra GN 6110 User Manual

3.2 Operation – with mobile telephone
If your headset is in its base, press the release headset button to free the headset before using it.
Turning headset ON:
Open the headset boom arm. The headset indicator lights for 2 seconds, and then continue to fl ash
slowly as long as the headset is on.
Turning headset OFF:
Close the headset boom arm. The headset indicator lights for 2 seconds, after which it will turn off.
Making calls:
1. Open the headset boom arm and place the headset on the ear.
2. Dial the desired number on your mobile, and press the mobile's
Yes/Send/Call button to begin calling.
The headset indicator will fl ash rapidly for the duration of the call.
Making voice-activated calls:
Note: Before making voice-activated calls, voice dialling must be activated on your mobile phone
and voice tags stored. Consult your mobile phone's user guide for full details.
To make voice-activated calls:
1. Open the headset boom arm and place the headset on the ear.
2. Press the Volume up/down buttons simultaneously on the headset for 3 seconds. The headset
will go into voice command mode, and an audible tone will be heard indicating that the headset
is expecting a voice command.
3. Give the desired voice command.
The headset indicator will fl ash rapidly for the duration of the call.
Answering calls:
1. Press the Multifunction Button on the headset, or open the headset boom arm if not already
opened.
The connection will be established shortly.
2. An audible tone will be heard, and you are now connected to your caller.
The headset indicator will fl ash rapidly for the duration of the call.
Ending calls:
Press the Multifunction Button on the headset. An audible tone will be heard.
The call will also terminate if the mobile phone's End Call button/functionality is used, or if the sec-
ond party hangs up.
8
GN6110_contents_EU_13-02-2004.indd 8 16-02-2004, 11:10:50