Download
Share
Print this page
  1. Manuals
  2. Brands
  3. EGO Manuals
  4. Trimmer
  5. ST1530E
  6. Repair manual line

EGO ST1530E Repair Manual Line

Line trimmer
Hide thumbs Also See for ST1530E:

Advertisement

Quick Links

Download this manual
REPAIR GUIDELINE
Line Trimmer_ST1530E
Version: 2
Issue Date: 10/08/2018

Advertisement

loading
Need help?

Need help?

Do you have a question about the ST1530E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for EGO ST1530E

Summary of Contents for EGO ST1530E

  • Page 1 REPAIR GUIDELINE Line Trimmer_ST1530E Version: 2 Issue Date: 10/08/2018...

  • Page 2: Table Of Contents

    Table of Contents ST1530E Line trimmer Contents Page Troubleshooting Tool list Part 1: Replace the cutting head set 5-13 Part 2: Replace the Motor Assembly 14-18 Part 3: Replace the PCBA 19-29...

  • Page 3: Troubleshooting

    Troubleshooting ST1530E Line trimmer Fault Problem Possible Cause Test & Solution Position Replace the cutting line. (e.g. 2.4mm Not feeding line Issue with cutting line. Trimmer line nylon line) Lower Support of the lower housing Hard to wind up line...

  • Page 4: Tool List

    Tool List For Repair ST1530E Line trimmer Tool List SPEC Remark Phillips Socket wrench 14mm Screwdriver T-15 T-10 Hex wrench Electric soldering iron Heat gun Heat shrinkable sleeves Scissors To remove the shrinkable sleeve...

  • Page 5: Part 1: Replace The Cutting Head Set

    cutting head set Part 1: Replace the...
  • Page 6 Replace the ST1530E Line trimmer 1. Stop the motor and remove the battery pack from the Line trimmer. 2. Loosen the two hex bolts in the guard with the M5 hex wrench, remove the guard from the shaft.
  • Page 7 Replace the ST1530E Line trimmer Press the release tabs on the upper cover to remove the lower housing assembly. Release tab Description Part Number Qty. Lower Housing 2826637001 Assembly lower housing assembly...
  • Page 8 Replace the ST1530E Line trimmer 4. Pull the compression spring out of lower housing assembly. Compression Spring Description Part Number Qty. Compression Spring 3660582001...
  • Page 9 Replace the ST1530E Line trimmer 5. Rotate the nut clockwise to remove the nut.
  • Page 10 Replace the ST1530E Line trimmer 6. Pull spool & upper cover & flange cover and flange out of the motor shaft. Replace broken parts accordingly if necessary. Plain Washer ③ ② ① Flange Upper cover Spool ④...
  • Page 11 Replace the ST1530E Line trimmer 7. Mount the nut onto motor shaft then rotate the nut counter-clockwise with a socket wrench.
  • Page 12 Replace the ST1530E Line trimmer 8. Align the tabs on the upper cover with the holes on the lower housing assembly to mount the lower housing assembly onto the upper housing assembly.
  • Page 13 Replace the ST1530E Line trimmer 9. Refer to the user manual to install the cutting line.
  • Page 14 Part 2: Replace the Motor & Gear Assembly...
  • Page 15 Replace the Motor & Gear Assembly ST1530E Line trimmer 1. Loosen the screws in the L R Housing Set (7 screws) and L R Handle Set (8 screws), remove L R Housing Set and L R Handle Set. L R Housing Set...
  • Page 16 Replace the Motor & Gear Assembly ST1530E Line trimmer 2. Loosen the screws on the fixing ring and motor & gear assembly, take out the shaft . Description Part Number Qty. Fixing ring 3705178001 Plain Washer 5650005001 Screw 5620479001...

  • Page 17: Part 2: Replace The Motor Assembly

    Replace the Motor Assembly ST1530E Line trimmer 3. Pull the connector to separate motor and PCBA.
  • Page 18 Replace the Motor & Gear Assembly ST1530E Line trimmer 4. Loosen screws and take out the motor & gear assembly from the gear case ASSY . 5. Replace the motor & gear assembly, then tighten the screws . Motor housing...

  • Page 19: Part 3: Replace The Pcba

    Part 3: Replace the PCBA...
  • Page 20 Replace the PCBA ST1530E Line trimmer 1. Loosen the screws in the L R Housing Set (7 screws) and L R Handle Set (8 screws), remove L R Housing Set and L R Handle Set. L R Housing Set L R Handle Set...
  • Page 21 Replace the PCBA ST1530E Line trimmer 2. Loosen the screws on the fixing rings and motor & gear assembly, take out the shaft . Description Part Number Qty. Fixing ring 3705178001 Plain Washer 5650005001 Screw 5620479001...
  • Page 22 Replace the PCBA ST1530E Line trimmer Remove the shaft and pull the connectors to separate motor& gear assembly.
  • Page 23 Replace the PCBA ST1530E Line trimmer 4. Take out the PCBA from the housings. Replace it with a new one. 5. The release button, latch, battery ejection lever, lock-off Trigger , switch Trigger ,speed change button , housings can be replaced if they are broken or worn.
  • Page 24 Replace the PCBA ST1530E Line trimmer 6. Align the cables in the grooves of L R housing set.
  • Page 25 Replace the PCBA ST1530E Line trimmer 7. Assembly the Battery ejection lever. Connect motor and PCBA , assembly the motor into L R housing Set.
  • Page 26 Replace the PCBA ST1530E Line trimmer 8. Align the locating pins on the housings with the holes in the shaft so as to put the shaft into place in housings, lock it by the fixed 2x screws. Align the pins with the holes...
  • Page 27 Replace the PCBA ST1530E Line trimmer Align the cables in the grooves of L R handle set.
  • Page 28 Replace the PCBA ST1530E Line trimmer 10. Close the handle housing, then close the rear housing(pictures on next page). NOTICE: The locating pin in housing set and handle set must align with the fixing hole in the shaft. Fixing pole in the handle housing...
  • Page 29 Replace the PCBA ST1530E Line trimmer 11. Lock the housings with tapping screws. THE END Upon continuous product improvement, please using the latest SBOM & Parts list to order spare parts if necessary.