Advertisement
Quick Links
PLMR62
Visit Our Website
6-1/2" 2-Way Marine Speaker System
SCAN ME
PyleUSA.com
Features:
•
6-112"High Quality Poly Carbon Cone
•
2-Way Water Resistant Construction Design
•
1"High Temperature Voice Coil
•
1/2"Neodymium Dome Tweeter
•
200 Watts Rated Peak Power
•
Frequency Response: 85Hz-20K Hz
•
4 Ohm Impedance
•
Sensitivity: 90dB
Installation
Cut the drywall.
Note: Always allow at least one-half
inch between a wall stud and the
speaker cutout, or the locking tabs
will not be able to swivel into place.
www.PyleUSA.com
USER GUIDE
Connect the speaker wires to the
speaker.
Advertisement
Related Manuals for Pyle PLMR62
Summary of Contents for Pyle PLMR62
- Page 1 PLMR62 Visit Our Website 6-1/2” 2-Way Marine Speaker System USER GUIDE SCAN ME PyleUSA.com Features: • 6-112"High Quality Poly Carbon Cone • 2-Way Water Resistant Construction Design • 1"High Temperature Voice Coil • 1/2"Neodymium Dome Tweeter • 200 Watts Rated Peak Power •...
- Page 2 Installation Screw down each of the four Phillips Replace the metal grille. head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall. Put in the strips of adhesive to secure the grille.
Need help?
Do you have a question about the PLMR62 and is the answer not in the manual?
Questions and answers
Can the speaker grilles be removed on plmr62’s