Package Contents; System Requirements - Dynex PM01433-A - DX-NRUTER Wireless N Router User Manual

Wireless n router

Hide thumbs

Table Of Contents

Table of Contents

Built-In Dynamic Host Configuration Protocol (DHCP)—Built-In Dynamic Host

Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a

network. The DHCP server will assign IP addresses to each computer automatically so there is

no need for a complicated networking setup.

Setup Assistant—The Setup assistant takes the guesswork out of setting up your router.

This automatic software determines your network settings for you and sets up your router for

connection to your Internet Service Provider (ISP). In a matter of minutes, your router will be

up and running on the Internet.

Note: Setup Assistant software is compatible with Windows 2000, Windows XP,

Integrated N Wireless Access Point—N MIMO is an exciting new wireless technology

based on the draft IEEE 802.11n specification. It employs MIMO (Multiple Input Multiple

Output) smart-antenna technology that achieves data rates up to 300 Mbps. Actual

throughput is typically lower than the connected data rate and will vary depending on your

networking environment.

Note: The standard transmission rate of 270 Mbps is the physical data rate. Actual data

MAC Address Filtering—For added security, you can set up a list of MAC addresses (unique

client identifiers) that are allowed access to your network. Every computer has its own MAC

address. Simply enter these MAC addresses into a list using the Web-Based Advanced User

Interface and you can control access to your network.